* dwarf2dbg.c (DWARF2_USE_FIXED_ADVANCE_PC): Enable when using

linker relaxation.
	(dwarf2_gen_line_info): Generate real, local, labels for line
	numbers.
	(dwarf2dbg_convert_frag): Do not finalize the computation of the
	frag's symbol value when linker relaxation is enabled.
	(ADDR_DELTA_LIMIT): Define.
	(size_fixed_inc_line_addr): Use ADDR_DELTA_LIMIT.
	(emit_fixed_inc_line_addr): Likewise.
	* write.c (fixup_segment): If the subtraction of two symbols
	cannot be resolved but is valid, then prevent bogus range warnings
	by pre-biasing add_number.
	* config/tc-h8300.h (DWARF2_USE_FIXED_ADVANCE_PC): Define to 0.

	* gas/lns/lns.exp: Use alternate lns-common test for targets
	enabling linker relaxation.
	* gas/lns/lns-big-delta.d: Allow for output from architectures
	with 32-bit addresses.

gas/ChangeLog

@@ -1,3 +1,19 @@
+2012-06-28  Nick Clifton  <nickc@redhat.com>
+
+	* dwarf2dbg.c (DWARF2_USE_FIXED_ADVANCE_PC): Enable when using
+	linker relaxation.
+	(dwarf2_gen_line_info): Generate real, local, labels for line
+	numbers.
+	(dwarf2dbg_convert_frag): Do not finalize the computation of the
+	frag's symbol value when linker relaxation is enabled.
+	(ADDR_DELTA_LIMIT): Define.
+	(size_fixed_inc_line_addr): Use ADDR_DELTA_LIMIT.
+	(emit_fixed_inc_line_addr): Likewise.
+	* write.c (fixup_segment): If the subtraction of two symbols
+	cannot be resolved but is valid, then prevent bogus range warnings
+	by pre-biasing add_number.
+	* config/tc-h8300.h (DWARF2_USE_FIXED_ADVANCE_PC): Define to 0.
+
 2012-06-22  Roland McGrath  <mcgrathr@google.com>
 
 	* NEWS: Mention 'rep ret' too.

gas/config/tc-h8300.h

@@ -51,6 +51,7 @@ struct internal_reloc;
 
 /* Minimum instruction is of 16 bits.  */
 #define DWARF2_LINE_MIN_INSN_LENGTH 2
+#define DWARF2_USE_FIXED_ADVANCE_PC 0
 
 #ifdef OBJ_ELF
 /* Provide mappings from the original H8 COFF relocation names to

gas/dwarf2dbg.c

@@ -119,7 +119,7 @@
    opcodes and variable-length operands cannot be used.  If this macro is
    nonzero, use the DW_LNS_fixed_advance_pc opcode instead.  */
 #ifndef DWARF2_USE_FIXED_ADVANCE_PC
-# define DWARF2_USE_FIXED_ADVANCE_PC	0
+# define DWARF2_USE_FIXED_ADVANCE_PC	linkrelax
 #endif
 
 /* First special line opcde - leave room for the standard opcodes.
@@ -361,7 +361,17 @@ dwarf2_gen_line_info (addressT ofs, struct dwarf2_line_info *loc)
   filenum = loc->filenum;
 
   dwarf2_push_line (loc);
-  dwarf2_flush_pending_lines (symbol_temp_new (now_seg, ofs, frag_now));
+  if (linkrelax)
+    {
+      char name[120];
+
+      /* Use a non-fake name for the line number location,
+	 so that it can be referred to by relocations.  */
+      sprintf (name, ".Loc.%u.%u", line, filenum);
+      dwarf2_flush_pending_lines (symbol_new (name, now_seg, ofs, frag_now));
+    }
+  else
+    dwarf2_flush_pending_lines (symbol_temp_new (now_seg, ofs, frag_now));
 }
 
 /* Returns the current source information.  If .file directives have
@@ -1064,6 +1074,7 @@ out_inc_line_addr (int line_delta, addressT addr_delta)
    line and address information, but it is required if linker relaxation
    could change the code offsets.  The following two routines *must* be
    kept in sync.  */
+#define ADDR_DELTA_LIMIT 50000
 
 static int
 size_fixed_inc_line_addr (int line_delta, addressT addr_delta)
@@ -1074,7 +1085,7 @@ size_fixed_inc_line_addr (int line_delta, addressT addr_delta)
   if (line_delta != INT_MAX)
     len = 1 + sizeof_leb128 (line_delta, 1);
 
-  if (addr_delta > 50000)
+  if (addr_delta > ADDR_DELTA_LIMIT)
     {
       /* DW_LNS_extended_op */
       len += 1 + sizeof_leb128 (sizeof_address + 1, 0);
@@ -1122,7 +1133,7 @@ emit_fixed_inc_line_addr (int line_delta, addressT addr_delta, fragS *frag,
      which this function would not be used) could change the operand by
      an unknown amount.  If the address increment is getting close to
      the limit, just reset the address.  */
-  if (addr_delta > 50000)
+  if (addr_delta > ADDR_DELTA_LIMIT)
     {
       symbolS *to_sym;
       expressionS exp;
@@ -1231,7 +1242,24 @@ dwarf2dbg_convert_frag (fragS *frag)
 {
   offsetT addr_diff;
 
-  addr_diff = resolve_symbol_value (frag->fr_symbol);
+  if (DWARF2_USE_FIXED_ADVANCE_PC)
+    {
+      /* If linker relaxation is enabled then the distance bewteen the two
+	 symbols in the frag->fr_symbol expression might change.  Hence we
+	 cannot rely upon the value computed by resolve_symbol_value.
+	 Instead we leave the expression unfinalized and allow
+	 emit_fixed_inc_line_addr to create a fixup (which later becomes a
+	 relocation) that will allow the linker to correctly compute the
+	 actual address difference.  We have to use a fixed line advance for
+	 this as we cannot (easily) relocate leb128 encoded values.  */
+      int saved_finalize_syms = finalize_syms;
+
+      finalize_syms = 0;
+      addr_diff = resolve_symbol_value (frag->fr_symbol);
+      finalize_syms = saved_finalize_syms;
+    }
+  else
+    addr_diff = resolve_symbol_value (frag->fr_symbol);
 
   /* fr_var carries the max_chars that we created the fragment with.
      fr_subtype carries the current expected length.  We must, of

gas/testsuite/ChangeLog

@@ -1,3 +1,10 @@
+2012-06-28  Nick Clifton  <nickc@redhat.com>
+
+	* gas/lns/lns.exp: Use alternate lns-common test for targets
+	enabling linker relaxation.
+	* gas/lns/lns-big-delta.d: Allow for output from architectures
+	with 32-bit addresses.
+
 2012-06-27  Alan Modra  <amodra@gmail.com>
 
 	* gas/i386/rep-ret.s: Zero pad section.

gas/testsuite/gas/lns/lns-big-delta.d

@@ -10,8 +10,8 @@ Raw dump of debug contents of section \.debug_line:
   Advance PC by fixed size amount 0 to 0x0
   Copy
   Advance Line by 1 to 3
-  Extended opcode 2: set Address to 0x124fc
+  Extended opcode 2: set Address to 0x.....
   Copy
-  Advance PC by fixed size amount 4 to 0x12500
+  Advance PC by fixed size amount . to 0x.....
   Extended opcode 1: End of Sequence
 #pass

gas/testsuite/gas/lns/lns.exp

@@ -17,7 +17,10 @@ if {
      && ![istarget s390*-*-*]
 } {
     # Use alternate file for targets using DW_LNS_fixed_advance_pc opcodes.
-    if { [istarget xtensa*-*-*] } {
+    if {    [istarget xtensa*-*-*]
+	 || [istarget am3*-*-*]
+	 || [istarget cr16-*-*]
+	 || [istarget mn10*-*-*] } {
       run_dump_test "lns-common-1-alt"
       run_dump_test "lns-big-delta"
     } elseif { [istarget ia64*-*-*] } {

gas/write.c

@@ -1004,7 +1004,12 @@ fixup_segment (fixS *fixP, segT this_segment)
 	      fixP->fx_subsy = NULL;
 	      fixP->fx_pcrel = 1;
 	    }
-	  else if (!TC_VALIDATE_FIX_SUB (fixP, add_symbol_segment))
+	  else if (TC_VALIDATE_FIX_SUB (fixP, add_symbol_segment))
+	    /* If the fix is valid, subtract fx_subsy here.  The addition of
+	       fx_addsy will be performed below.  Doing this prevents bogus
+	       warnings from the range check below.  */
+	      add_number -= S_GET_VALUE (fixP->fx_subsy);
+	  else
 	    {
 	      if (!md_register_arithmetic
 		  && (add_symbol_segment == reg_section