diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/FreeRTOSConfig.h b/Demo/ARM7_LPC2129_Keil_RVDS/FreeRTOSConfig.h
new file mode 100644
index 0000000000..ce80f4067b
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/FreeRTOSConfig.h
@@ -0,0 +1,97 @@
+/*
+ FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.
+
+ This file is part of the FreeRTOS.org distribution.
+
+ FreeRTOS.org is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ FreeRTOS.org is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with FreeRTOS.org; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ A special exception to the GPL can be applied should you wish to distribute
+ a combined work that includes FreeRTOS.org, without being obliged to provide
+ the source code for any proprietary components. See the licensing section
+ of http://www.FreeRTOS.org for full details of how and when the exception
+ can be applied.
+
+ ***************************************************************************
+ ***************************************************************************
+ * *
+ * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
+ * and even write all or part of your application on your behalf. *
+ * See http://www.OpenRTOS.com for details of the services we provide to *
+ * expedite your project. *
+ * *
+ ***************************************************************************
+ ***************************************************************************
+
+ Please ensure to read the configuration and relevant port sections of the
+ online documentation.
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+#include <lpc21xx.h>
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+#define configUSE_PREEMPTION 1
+#define configUSE_IDLE_HOOK 0
+#define configUSE_TICK_HOOK 0
+#define configCPU_CLOCK_HZ ( ( unsigned portLONG ) 60000000 ) /* =12.0MHz xtal multiplied by 5 using the PLL. */
+#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
+#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )
+#define configMINIMAL_STACK_SIZE ( ( unsigned portSHORT ) 100 )
+#define configTOTAL_HEAP_SIZE ( ( size_t ) 13 * 1024 )
+#define configMAX_TASK_NAME_LEN ( 16 )
+#define configUSE_TRACE_FACILITY 0
+#define configUSE_16_BIT_TICKS 0
+#define configIDLE_SHOULD_YIELD 1
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet 1
+#define INCLUDE_uxTaskPriorityGet 1
+#define INCLUDE_vTaskDelete 1
+#define INCLUDE_vTaskCleanUpResources 0
+#define INCLUDE_vTaskSuspend 1
+#define INCLUDE_vTaskDelayUntil 1
+#define INCLUDE_vTaskDelay 1
+
+
+
+#endif /* FREERTOS_CONFIG_H */
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/ParTest/ParTest.c b/Demo/ARM7_LPC2129_Keil_RVDS/ParTest/ParTest.c
new file mode 100644
index 0000000000..69981b26de
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/ParTest/ParTest.c
@@ -0,0 +1,114 @@
+/*
+ FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.
+
+ This file is part of the FreeRTOS.org distribution.
+
+ FreeRTOS.org is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ FreeRTOS.org is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with FreeRTOS.org; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ A special exception to the GPL can be applied should you wish to distribute
+ a combined work that includes FreeRTOS.org, without being obliged to provide
+ the source code for any proprietary components. See the licensing section
+ of http://www.FreeRTOS.org for full details of how and when the exception
+ can be applied.
+
+ ***************************************************************************
+ ***************************************************************************
+ * *
+ * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
+ * and even write all or part of your application on your behalf. *
+ * See http://www.OpenRTOS.com for details of the services we provide to *
+ * expedite your project. *
+ * *
+ ***************************************************************************
+ ***************************************************************************
+
+ Please ensure to read the configuration and relevant port sections of the
+ online documentation.
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+#include "FreeRTOS.h"
+#include "portable.h"
+#include "partest.h"
+
+#define partstFIRST_IO ( ( unsigned portLONG ) 0x10000 )
+#define partstNUM_LEDS ( 8 )
+
+/*-----------------------------------------------------------
+ * Simple parallel port IO routines.
+ *-----------------------------------------------------------*/
+
+void vParTestInitialise( void )
+{
+ /* This is performed from main() as the io bits are shared with other setup
+ functions. */
+}
+/*-----------------------------------------------------------*/
+
+void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
+{
+unsigned portLONG ulLED = partstFIRST_IO;
+
+ if( uxLED < partstNUM_LEDS )
+ {
+ /* Rotate to the wanted bit of port 0. Only P16 to P23 have an LED
+ attached. */
+ ulLED <<= ( unsigned portLONG ) uxLED;
+
+ /* Set or clear the output. */
+ if( xValue )
+ {
+ IOSET1 = ulLED;
+ }
+ else
+ {
+ IOCLR1 = ulLED;
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
+{
+unsigned portLONG ulLED = partstFIRST_IO, ulCurrentState;
+
+ if( uxLED < partstNUM_LEDS )
+ {
+ /* Rotate to the wanted bit of port 0. Only P10 to P13 have an LED
+ attached. */
+ ulLED <<= ( unsigned portLONG ) uxLED;
+
+ /* If this bit is already set, clear it, and visa versa. */
+ ulCurrentState = IOPIN1;
+ if( ulCurrentState & ulLED )
+ {
+ IOCLR1 = ulLED;
+ }
+ else
+ {
+ IOSET1 = ulLED;
+ }
+ }
+}
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.Opt b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.Opt
new file mode 100644
index 0000000000..cb1378dc7e
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.Opt
@@ -0,0 +1,54 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+ cExt (*.c)
+ aExt (*.s*; *.src; *.a*)
+ oExt (*.obj)
+ lExt (*.lib)
+ tExt (*.txt; *.h; *.inc)
+ pExt (*.plm)
+ CppX (*.cpp)
+ DaveTm { 0,0,0,0,0,0,0,0 }
+
+Target (RTOSDemo), 0x0004 // Tools: 'ARM-ADS'
+GRPOPT 1,(Other),1,0,0
+GRPOPT 2,(FreeRTOS),0,0,0
+GRPOPT 3,(Stadard Demo),0,0,0
+
+OPTFFF 1,1,2,0,0,0,0,0,<.\Startup.s><Startup.s>
+OPTFFF 1,2,1,0,0,0,0,0,<.\ParTest\ParTest.c><ParTest.c>
+OPTFFF 1,3,1,2,0,160,164,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,154,0,0,0,161,0,0,0,23,5,0,0,111,2,0,0 }
+OPTFFF 1,4,1,234881024,0,0,0,0,<.\serial\serial.c><serial.c>
+OPTFFF 1,5,2,486539264,0,0,0,0,<.\serial\serialISR.s><serialISR.s>
+OPTFFF 2,6,1,0,0,0,0,0,<..\..\Source\tasks.c><tasks.c>
+OPTFFF 2,7,1,0,0,0,0,0,<..\..\Source\list.c><list.c>
+OPTFFF 2,8,1,0,0,0,0,0,<..\..\Source\queue.c><queue.c>
+OPTFFF 2,9,1,0,0,0,0,0,<..\..\Source\portable\RVDS\ARM7_LPC21xx\port.c><port.c>
+OPTFFF 2,10,1,0,0,0,0,0,<..\..\Source\portable\MemMang\heap_2.c><heap_2.c>
+OPTFFF 2,11,2,0,0,0,0,0,<..\..\Source\portable\RVDS\ARM7_LPC21xx\portASM.s><portASM.s>
+OPTFFF 3,12,1,0,0,0,0,0,<..\Common\Minimal\flash.c><flash.c>
+OPTFFF 3,13,1,0,0,0,0,0,<..\Common\Minimal\integer.c><integer.c>
+OPTFFF 3,14,1,0,0,0,0,0,<..\Common\Minimal\comtest.c><comtest.c>
+
+
+TARGOPT 1, (RTOSDemo)
+ ADSCLK=12000000
+ OPTTT 1,1,1,0
+ OPTHX 1,65535,0,0,0
+ OPTLX 79,66,8,<.\>
+ OPTOX 16
+ OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
+ OPTXL 1,1,1,1,1,1,1,0,0
+ OPTFL 1,0,1
+ OPTAX 8
+ OPTBL 0,(Data Sheet)<DATASHTS\PHILIPS\LPC2119_2129.PDF>
+ OPTBL 1,(User Manual)<DATASHTS\PHILIPS\user_manual_LPC2119_2129_2194_2292_2294.PDF>
+ OPTDL (SARM.DLL)(-cLPC2100)(DARMP.DLL)(-pLPC21x9)(SARM.DLL)()(TARMP.DLL)(-pLPC21x9)
+ OPTDBG 48125,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
+ OPTKEY 0,(DLGDARM)((134=-1,-1,-1,-1,0)(135=-1,-1,-1,-1,0)(107=-1,-1,-1,-1,0)(108=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(105=-1,-1,-1,-1,0)(80=-1,-1,-1,-1,0)(104=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(101=-1,-1,-1,-1,0)(113=-1,-1,-1,-1,0)(112=-1,-1,-1,-1,0)(136=-1,-1,-1,-1,0)(117=-1,-1,-1,-1,0)(118=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(114=-1,-1,-1,-1,0)(119=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(115=-1,-1,-1,-1,0)(116=-1,-1,-1,-1,0))
+ OPTKEY 0,(ARMDBGFLAGS)(-T5F)
+ OPTDF 0x86
+ OPTLE <>
+ OPTLC <>
+EndOpt
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.Uv2 b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.Uv2
new file mode 100644
index 0000000000..fb042d75df
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.Uv2
@@ -0,0 +1,115 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+Target (RTOSDemo), 0x0004 // Tools: 'ARM-ADS'
+
+Group (Other)
+Group (FreeRTOS)
+Group (Stadard Demo)
+
+File 1,2,<.\Startup.s><Startup.s>
+File 1,1,<.\ParTest\ParTest.c><ParTest.c>
+File 1,1,<.\main.c><main.c>
+File 1,1,<.\serial\serial.c><serial.c>
+File 1,2,<.\serial\serialISR.s><serialISR.s>
+File 2,1,<..\..\Source\tasks.c><tasks.c>
+File 2,1,<..\..\Source\list.c><list.c>
+File 2,1,<..\..\Source\queue.c><queue.c>
+File 2,1,<..\..\Source\portable\RVDS\ARM7_LPC21xx\port.c><port.c>
+File 2,1,<..\..\Source\portable\MemMang\heap_2.c><heap_2.c>
+File 2,2,<..\..\Source\portable\RVDS\ARM7_LPC21xx\portASM.s><portASM.s>
+File 3,1,<..\Common\Minimal\flash.c><flash.c>
+File 3,1,<..\Common\Minimal\integer.c><integer.c>
+File 3,1,<..\Common\Minimal\comtest.c><comtest.c>
+
+
+Options 1,0,0 // Target 'RTOSDemo'
+ Device (LPC2129)
+ Vendor (NXP (founded by Philips))
+ Cpu (IRAM(0x40000000-0x40003FFF) IROM(0-0x3FFFF) CLOCK(12000000) CPUTYPE(ARM7TDMI))
+ FlashUt (LPC210x_ISP.EXE ("#H" ^X $D COM1: 9600 1))
+ StupF ("STARTUP\Philips\Startup.s" ("Philips LPC2100 Startup Code"))
+ FlashDR (UL2ARM(-U40296420 -O7 -C0 -FO7 -FD40000000 -FC800 -FN1 -FF0LPC_IAP_256 -FS00 -FL03E000))
+ DevID (3648)
+ Rgf (LPC21xx.H)
+ Mem ()
+ C ()
+ A ()
+ RL ()
+ OH ()
+ DBC_IFX ()
+ DBC_CMS ()
+ DBC_AMS ()
+ DBC_LMS ()
+ UseEnv=0
+ EnvBin ()
+ EnvInc ()
+ EnvLib ()
+ EnvReg (�Philips\)
+ OrgReg (�Philips\)
+ TgStat=16
+ OutDir (.\)
+ OutName (RTOSDemo)
+ GenApp=1
+ GenLib=0
+ GenHex=0
+ Debug=1
+ Browse=1
+ LstDir (.\)
+ HexSel=1
+ MG32K=0
+ TGMORE=0
+ RunUsr 0 0 <>
+ RunUsr 1 0 <>
+ BrunUsr 0 0 <>
+ BrunUsr 1 0 <>
+ CrunUsr 0 0 <>
+ CrunUsr 1 0 <>
+ SVCSID <>
+ GLFLAGS=1790
+ ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ACPUTYP (ARM7TDMI)
+ RVDEV ()
+ ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSIRAM { 0,0,0,0,64,0,64,0,0 }
+ OCMADSIROM { 1,0,0,0,0,0,0,4,0 }
+ OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
+ OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,4,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,64,0,64,0,0,0,0,0,0,0,0,0,0,0 }
+ RV_STAVEC ()
+ ADSCCFLG { 5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSCMISC ()
+ ADSCDEFN (ARM7_LPC21xx_KEIL_RVDS)
+ ADSCUDEF ()
+ ADSCINCD (.;..\..\Source\portable\RVDS\ARM7_LPC21xx;..\Common\include;..\..\Source\include)
+ ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSAMISC ()
+ ADSADEFN ()
+ ADSAUDEF ()
+ ADSAINCD (..\..\Source\portable\RVDS\ARM7_LPC21xx)
+ PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ IncBld=1
+ AlwaysBuild=0
+ GenAsm=0
+ AsmAsm=0
+ PublicsOnly=0
+ StopCode=3
+ CustArgs ()
+ LibMods ()
+ ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSLDTA (0x00000000)
+ ADSLDDA (0x40000000)
+ ADSLDSC ()
+ ADSLDIB ()
+ ADSLDIC ()
+ ADSLDMC ()
+ ADSLDIF ()
+ ADSLDDW ()
+ OPTDL (SARM.DLL)(-cLPC2100)(DARMP.DLL)(-pLPC21x9)(SARM.DLL)()(TARMP.DLL)(-pLPC21x9)
+ OPTDBG 48125,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
+ FLASH1 { 2,0,0,0,0,0,0,0,255,255,255,255,0,0,0,0,0,0,0,0 }
+ FLASH2 ()
+ FLASH3 (LPC210x_ISP.EXE ("#H" ^X $D COM1: 9600 1))
+ FLASH4 ()
+EndOpt
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.plg b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.plg
new file mode 100644
index 0000000000..9b87df214e
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.plg
@@ -0,0 +1,11 @@
+<html>
+<body>
+<pre>
+<h1>�Vision3 Build Log</h1>
+<h2>Project:</h2>
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\ARM7_LPC2129_Keil_RVDS\RTOSDemo.uv2
+Project File Date: 10/23/2008
+
+<h2>Output:</h2>
+Clean started: Project: 'RTOSDemo'
+ deleting intermediate output files for target 'RTOSDemo'
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.sct b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.sct
new file mode 100644
index 0000000000..c85a813f18
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.sct
@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x00000000 0x00040000 { ; load region size_region
+ ER_IROM1 0x00000000 0x00040000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x40000000 0x00004000 { ; RW data
+ .ANY (+RW +ZI)
+ }
+}
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.tra b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.tra
new file mode 100644
index 0000000000..1cc2f2451b
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo.tra
@@ -0,0 +1,32 @@
+*** Creating Trace Output File 'RTOSDemo.tra' Ok.
+### Preparing for ADS-LD.
+### Creating ADS-LD Command Line
+### List of Objects: adding '"startup.o"'
+### List of Objects: adding '"partest.o"'
+### List of Objects: adding '"main.o"'
+### List of Objects: adding '"serial.o"'
+### List of Objects: adding '"serialisr.o"'
+### List of Objects: adding '"tasks.o"'
+### List of Objects: adding '"list.o"'
+### List of Objects: adding '"queue.o"'
+### List of Objects: adding '"port.o"'
+### List of Objects: adding '"heap_2.o"'
+### List of Objects: adding '".\portasm.o"'
+### List of Objects: adding '"flash.o"'
+### List of Objects: adding '"integer.o"'
+### List of Objects: adding '"comtest.o"'
+### ADS-LD Command completed:
+"startup.o" "partest.o" "main.o" "serial.o" "serialisr.o" "tasks.o" "list.o" "queue.o" "port.o" "heap_2.o" ".\portasm.o" "flash.o" "integer.o" "comtest.o" --device DARMP --strict --scatter "RTOSDemo.sct"
+--autoat --summary_stderr --info summarysizes --map --xref --callgraph --symbols
+--info sizes --info totals --info unused --info veneers
+ --list ".\RTOSDemo.map" -o "RTOSDemo.axf"### Preparing Environment (PrepEnvAds)
+### ADS-LD Output File: 'RTOSDemo.axf'
+### ADS-LD Command File: 'RTOSDemo.lnp'
+### Checking for dirty Components...
+### Creating CmdFile 'RTOSDemo.lnp', Handle=0x0000044C
+### Writing '.lnp' file
+### ADS-LD Command file 'RTOSDemo.lnp' is ready.
+### ADS-LD: About to start ADS-LD Thread.
+### ADS-LD: executed with 0 errors
+### Updating obj list
+### LDADS_file() completed.
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemoSignal.UVL b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemoSignal.UVL
new file mode 100644
index 0000000000..7df396ed8b
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemoSignal.UVL
@@ -0,0 +1,40 @@
+[Signal 1]
+DispName=Port1
+PlotType=1
+Color=16711935
+MinDec=0
+MinVal=0.
+MaxDec=0
+MaxVal=-1.
+Mask=65536
+Offset=16
+[Signal 2]
+DispName=Port1
+PlotType=1
+Color=255
+MinDec=0
+MinVal=0.
+MaxDec=0
+MaxVal=-1.
+Mask=131072
+Offset=17
+[Signal 3]
+DispName=Port1
+PlotType=1
+Color=32768
+MinDec=0
+MinVal=0.
+MaxDec=0
+MaxVal=-1.
+Mask=262144
+Offset=18
+[Signal 4]
+DispName=Port1
+PlotType=1
+Color=16711680
+MinDec=0
+MinVal=0.
+MaxDec=0
+MaxVal=-1.
+Mask=524288
+Offset=19
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Opt.Bak b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Opt.Bak
new file mode 100644
index 0000000000..97e4c82d62
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Opt.Bak
@@ -0,0 +1,56 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+ cExt (*.c)
+ aExt (*.s*; *.src; *.a*)
+ oExt (*.obj)
+ lExt (*.lib)
+ tExt (*.txt; *.h; *.inc)
+ pExt (*.plm)
+ CppX (*.cpp)
+ DaveTm { 0,0,0,0,0,0,0,0 }
+
+Target (RTOSDemo), 0x0004 // Tools: 'ARM-ADS'
+GRPOPT 1,(Other),0,0,0
+GRPOPT 2,(FreeRTOS),0,0,0
+GRPOPT 3,(Stadard Demo),0,0,0
+
+OPTFFF 1,1,2,0,0,1,1,0,<.\Startup.s><Startup.s> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,132,0,0,0,138,0,0,0,237,3,0,0,92,2,0,0 }
+OPTFFF 1,2,1,0,0,1,1,0,<.\ParTest\ParTest.c><ParTest.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,154,0,0,0,161,0,0,0,3,4,0,0,115,2,0,0 }
+OPTFFF 1,3,1,0,0,1,1,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,133,0,0,0,3,0,0,0,24,5,0,0,214,2,0,0 }
+OPTFFF 1,4,1,0,0,1,1,0,<.\serial\serial.c><serial.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,88,0,0,0,92,0,0,0,189,3,0,0,42,2,0,0 }
+OPTFFF 2,5,1,0,0,0,0,0,<..\..\Source\tasks.c><tasks.c>
+OPTFFF 2,6,1,0,0,0,0,0,<..\..\Source\list.c><list.c>
+OPTFFF 2,7,1,0,0,0,0,0,<..\..\Source\queue.c><queue.c>
+OPTFFF 2,8,1,0,0,34,51,0,<..\..\Source\portable\RVDS\ARM7_LPC21xx\port.c><port.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,88,0,0,0,92,0,0,0,171,3,0,0,107,2,0,0 }
+OPTFFF 2,9,1,0,0,1,1,0,<..\..\Source\portable\MemMang\heap_2.c><heap_2.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,101,3,0,0,206,1,0,0 }
+OPTFFF 2,10,2,50331650,0,24,48,0,<.\serial\serialISRE.s><serialISRE.s> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,22,0,0,0,23,0,0,0,123,3,0,0,229,1,0,0 }
+OPTFFF 2,11,2,0,0,1,1,0,<..\..\Source\portable\RVDS\ARM7_LPC21xx\portASM.s><portASM.s> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,0,0,0,46,0,0,0,145,3,0,0,252,1,0,0 }
+OPTFFF 3,12,1,0,0,0,0,0,<..\Common\Minimal\flash.c><flash.c>
+OPTFFF 3,13,1,0,0,0,0,0,<..\Common\Minimal\integer.c><integer.c>
+OPTFFF 3,14,1,0,0,0,0,0,<..\Common\Minimal\comtest.c><comtest.c>
+
+ExtF <C:\E\Dev\FreeRTOS\WorkingCopy2\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h> 28,49,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,66,0,0,0,69,0,0,0,167,3,0,0,19,2,0,0 }
+
+TARGOPT 1, (RTOSDemo)
+ ADSCLK=12000000
+ OPTTT 1,1,1,0
+ OPTHX 1,65535,0,0,0
+ OPTLX 79,66,8,<.\>
+ OPTOX 16
+ OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
+ OPTXL 1,1,1,1,1,1,1,0,0
+ OPTFL 1,0,1
+ OPTAX 8
+ OPTBL 0,(Data Sheet)<DATASHTS\PHILIPS\LPC2119_2129.PDF>
+ OPTBL 1,(User Manual)<DATASHTS\PHILIPS\user_manual_LPC2119_2129_2194_2292_2294.PDF>
+ OPTDL (SARM.DLL)(-cLPC2100)(DARMP.DLL)(-pLPC21x9)(SARM.DLL)()(TARMP.DLL)(-pLPC21x9)
+ OPTDBG 48125,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
+ OPTKEY 0,(DLGDARM)((134=-1,-1,-1,-1,0)(135=-1,-1,-1,-1,0)(107=-1,-1,-1,-1,0)(108=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(105=-1,-1,-1,-1,0)(80=-1,-1,-1,-1,0)(104=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(101=-1,-1,-1,-1,0)(113=-1,-1,-1,-1,0)(112=-1,-1,-1,-1,0)(136=-1,-1,-1,-1,0)(117=-1,-1,-1,-1,0)(118=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(114=-1,-1,-1,-1,0)(119=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(115=-1,-1,-1,-1,0)(116=-1,-1,-1,-1,0))
+ OPTKEY 0,(ARMDBGFLAGS)(-T5F)
+ OPTBB 0,0,203,1,8560,0,0,0,0,1,<port.c>()()
+ OPTDF 0x86
+ OPTLE <>
+ OPTLC <>
+EndOpt
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Target 1.dep b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Target 1.dep
new file mode 100644
index 0000000000..0533e3a4e1
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Target 1.dep
@@ -0,0 +1,2 @@
+Dependencies for Project 'RTOSDemo', Target 'Target 1': (DO NOT MODIFY !)
+F (.\Startup.s)(0x47F4A5D0)(--device DARMP -g --apcs=interwork -I "C:\Devtools\Keil305_2\ARM\INC\Philips" --list "Startup.lst" --xref -o "Startup.o")
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Uv2.Bak b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Uv2.Bak
new file mode 100644
index 0000000000..2b6e5efec7
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/RTOSDemo_Uv2.Bak
@@ -0,0 +1,115 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+Target (RTOSDemo), 0x0004 // Tools: 'ARM-ADS'
+
+Group (Other)
+Group (FreeRTOS)
+Group (Stadard Demo)
+
+File 1,2,<.\Startup.s><Startup.s>
+File 1,1,<.\ParTest\ParTest.c><ParTest.c>
+File 1,1,<.\main.c><main.c>
+File 1,1,<.\serial\serial.c><serial.c>
+File 2,1,<..\..\Source\tasks.c><tasks.c>
+File 2,1,<..\..\Source\list.c><list.c>
+File 2,1,<..\..\Source\queue.c><queue.c>
+File 2,1,<..\..\Source\portable\RVDS\ARM7_LPC21xx\port.c><port.c>
+File 2,1,<..\..\Source\portable\MemMang\heap_2.c><heap_2.c>
+File 2,2,<.\serial\serialISRE.s><serialISRE.s>
+File 2,2,<..\..\Source\portable\RVDS\ARM7_LPC21xx\portASM.s><portASM.s>
+File 3,1,<..\Common\Minimal\flash.c><flash.c>
+File 3,1,<..\Common\Minimal\integer.c><integer.c>
+File 3,1,<..\Common\Minimal\comtest.c><comtest.c>
+
+
+Options 1,0,0 // Target 'RTOSDemo'
+ Device (LPC2129)
+ Vendor (NXP (founded by Philips))
+ Cpu (IRAM(0x40000000-0x40003FFF) IROM(0-0x3FFFF) CLOCK(12000000) CPUTYPE(ARM7TDMI))
+ FlashUt (LPC210x_ISP.EXE ("#H" ^X $D COM1: 9600 1))
+ StupF ("STARTUP\Philips\Startup.s" ("Philips LPC2100 Startup Code"))
+ FlashDR (UL2ARM(-U40296420 -O7 -C0 -FO7 -FD40000000 -FC800 -FN1 -FF0LPC_IAP_256 -FS00 -FL03E000))
+ DevID (3648)
+ Rgf (LPC21xx.H)
+ Mem ()
+ C ()
+ A ()
+ RL ()
+ OH ()
+ DBC_IFX ()
+ DBC_CMS ()
+ DBC_AMS ()
+ DBC_LMS ()
+ UseEnv=0
+ EnvBin ()
+ EnvInc ()
+ EnvLib ()
+ EnvReg (�Philips\)
+ OrgReg (�Philips\)
+ TgStat=16
+ OutDir (.\)
+ OutName (RTOSDemo)
+ GenApp=1
+ GenLib=0
+ GenHex=0
+ Debug=1
+ Browse=1
+ LstDir (.\)
+ HexSel=1
+ MG32K=0
+ TGMORE=0
+ RunUsr 0 0 <>
+ RunUsr 1 0 <>
+ BrunUsr 0 0 <>
+ BrunUsr 1 0 <>
+ CrunUsr 0 0 <>
+ CrunUsr 1 0 <>
+ SVCSID <>
+ GLFLAGS=1790
+ ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ACPUTYP (ARM7TDMI)
+ RVDEV ()
+ ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSIRAM { 0,0,0,0,64,0,64,0,0 }
+ OCMADSIROM { 1,0,0,0,0,0,0,4,0 }
+ OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
+ OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,4,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,64,0,64,0,0,0,0,0,0,0,0,0,0,0 }
+ RV_STAVEC ()
+ ADSCCFLG { 5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSCMISC ()
+ ADSCDEFN (ARM7_LPC21xx_KEIL_RVDS)
+ ADSCUDEF ()
+ ADSCINCD (.;..\..\Source\portable\RVDS\ARM7_LPC21xx;..\Common\include;..\..\Source\include)
+ ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSAMISC ()
+ ADSADEFN ()
+ ADSAUDEF ()
+ ADSAINCD (..\..\Source\portable\RVDS\ARM7_LPC21xx)
+ PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ IncBld=1
+ AlwaysBuild=0
+ GenAsm=0
+ AsmAsm=0
+ PublicsOnly=0
+ StopCode=3
+ CustArgs ()
+ LibMods ()
+ ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSLDTA (0x00000000)
+ ADSLDDA (0x40000000)
+ ADSLDSC ()
+ ADSLDIB ()
+ ADSLDIC ()
+ ADSLDMC ()
+ ADSLDIF ()
+ ADSLDDW ()
+ OPTDL (SARM.DLL)(-cLPC2100)(DARMP.DLL)(-pLPC21x9)(SARM.DLL)()(TARMP.DLL)(-pLPC21x9)
+ OPTDBG 48125,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
+ FLASH1 { 2,0,0,0,0,0,0,0,255,255,255,255,0,0,0,0,0,0,0,0 }
+ FLASH2 ()
+ FLASH3 (LPC210x_ISP.EXE ("#H" ^X $D COM1: 9600 1))
+ FLASH4 ()
+EndOpt
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/Startup.s b/Demo/ARM7_LPC2129_Keil_RVDS/Startup.s
new file mode 100644
index 0000000000..6aa4d2032a
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/Startup.s
@@ -0,0 +1,429 @@
+;/*****************************************************************************/
+;/* STARTUP.S: Startup file for Philips LPC2000 */
+;/*****************************************************************************/
+;/* <<< Use Configuration Wizard in Context Menu >>> */
+;/*****************************************************************************/
+;/* This file is part of the uVision/ARM development tools. */
+;/* Copyright (c) 2005-2007 Keil Software. All rights reserved. */
+;/* This software may only be used under the terms of a valid, current, */
+;/* end user licence from KEIL for a compatible version of KEIL software */
+;/* development tools. Nothing else gives you the right to use this software. */
+;/*****************************************************************************/
+
+
+;/*
+; * The STARTUP.S code is executed after CPU Reset. This file may be
+; * translated with the following SET symbols. In uVision these SET
+; * symbols are entered under Options - ASM - Define.
+; *
+; * REMAP: when set the startup code initializes the register MEMMAP
+; * which overwrites the settings of the CPU configuration pins. The
+; * startup and interrupt vectors are remapped from:
+; * 0x00000000 default setting (not remapped)
+; * 0x80000000 when EXTMEM_MODE is used
+; * 0x40000000 when RAM_MODE is used
+; *
+; * EXTMEM_MODE: when set the device is configured for code execution
+; * from external memory starting at address 0x80000000.
+; *
+; * RAM_MODE: when set the device is configured for code execution
+; * from on-chip RAM starting at address 0x40000000.
+; *
+; * EXTERNAL_MODE: when set the PIN2SEL values are written that enable
+; * the external BUS at startup.
+; */
+
+
+; Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs
+
+Mode_USR EQU 0x10
+Mode_FIQ EQU 0x11
+Mode_IRQ EQU 0x12
+Mode_SVC EQU 0x13
+Mode_ABT EQU 0x17
+Mode_UND EQU 0x1B
+Mode_SYS EQU 0x1F
+
+I_Bit EQU 0x80 ; when I bit is set, IRQ is disabled
+F_Bit EQU 0x40 ; when F bit is set, FIQ is disabled
+
+
+;// <h> Stack Configuration (Stack Sizes in Bytes)
+;// <o0> Undefined Mode <0x0-0xFFFFFFFF:8>
+;// <o1> Supervisor Mode <0x0-0xFFFFFFFF:8>
+;// <o2> Abort Mode <0x0-0xFFFFFFFF:8>
+;// <o3> Fast Interrupt Mode <0x0-0xFFFFFFFF:8>
+;// <o4> Interrupt Mode <0x0-0xFFFFFFFF:8>
+;// <o5> User/System Mode <0x0-0xFFFFFFFF:8>
+;// </h>
+
+UND_Stack_Size EQU 0x00000008
+SVC_Stack_Size EQU 0x00000400
+ABT_Stack_Size EQU 0x00000008
+FIQ_Stack_Size EQU 0x00000008
+IRQ_Stack_Size EQU 0x00000400
+USR_Stack_Size EQU 0x00000008
+
+ISR_Stack_Size EQU (UND_Stack_Size + SVC_Stack_Size + ABT_Stack_Size + \
+ FIQ_Stack_Size + IRQ_Stack_Size)
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+
+Stack_Mem SPACE USR_Stack_Size
+__initial_sp SPACE ISR_Stack_Size
+
+Stack_Top
+
+
+;// <h> Heap Configuration
+;// <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF>
+;// </h>
+
+Heap_Size EQU 0x00000000
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+; VPBDIV definitions
+VPBDIV EQU 0xE01FC100 ; VPBDIV Address
+
+;// <e> VPBDIV Setup
+;// <i> Peripheral Bus Clock Rate
+;// <o1.0..1> VPBDIV: VPB Clock
+;// <0=> VPB Clock = CPU Clock / 4
+;// <1=> VPB Clock = CPU Clock
+;// <2=> VPB Clock = CPU Clock / 2
+;// <o1.4..5> XCLKDIV: XCLK Pin
+;// <0=> XCLK Pin = CPU Clock / 4
+;// <1=> XCLK Pin = CPU Clock
+;// <2=> XCLK Pin = CPU Clock / 2
+;// </e>
+VPBDIV_SETUP EQU 0
+VPBDIV_Val EQU 0x00000000
+
+
+; Phase Locked Loop (PLL) definitions
+PLL_BASE EQU 0xE01FC080 ; PLL Base Address
+PLLCON_OFS EQU 0x00 ; PLL Control Offset
+PLLCFG_OFS EQU 0x04 ; PLL Configuration Offset
+PLLSTAT_OFS EQU 0x08 ; PLL Status Offset
+PLLFEED_OFS EQU 0x0C ; PLL Feed Offset
+PLLCON_PLLE EQU (1<<0) ; PLL Enable
+PLLCON_PLLC EQU (1<<1) ; PLL Connect
+PLLCFG_MSEL EQU (0x1F<<0) ; PLL Multiplier
+PLLCFG_PSEL EQU (0x03<<5) ; PLL Divider
+PLLSTAT_PLOCK EQU (1<<10) ; PLL Lock Status
+
+;// <e> PLL Setup
+;// <o1.0..4> MSEL: PLL Multiplier Selection
+;// <1-32><#-1>
+;// <i> M Value
+;// <o1.5..6> PSEL: PLL Divider Selection
+;// <0=> 1 <1=> 2 <2=> 4 <3=> 8
+;// <i> P Value
+;// </e>
+PLL_SETUP EQU 1
+PLLCFG_Val EQU 0x00000024
+
+
+; Memory Accelerator Module (MAM) definitions
+MAM_BASE EQU 0xE01FC000 ; MAM Base Address
+MAMCR_OFS EQU 0x00 ; MAM Control Offset
+MAMTIM_OFS EQU 0x04 ; MAM Timing Offset
+
+;// <e> MAM Setup
+;// <o1.0..1> MAM Control
+;// <0=> Disabled
+;// <1=> Partially Enabled
+;// <2=> Fully Enabled
+;// <i> Mode
+;// <o2.0..2> MAM Timing
+;// <0=> Reserved <1=> 1 <2=> 2 <3=> 3
+;// <4=> 4 <5=> 5 <6=> 6 <7=> 7
+;// <i> Fetch Cycles
+;// </e>
+MAM_SETUP EQU 1
+MAMCR_Val EQU 0x00000002
+MAMTIM_Val EQU 0x00000004
+
+
+; External Memory Controller (EMC) definitions
+EMC_BASE EQU 0xFFE00000 ; EMC Base Address
+BCFG0_OFS EQU 0x00 ; BCFG0 Offset
+BCFG1_OFS EQU 0x04 ; BCFG1 Offset
+BCFG2_OFS EQU 0x08 ; BCFG2 Offset
+BCFG3_OFS EQU 0x0C ; BCFG3 Offset
+
+;// <e> External Memory Controller (EMC)
+EMC_SETUP EQU 0
+
+;// <e> Bank Configuration 0 (BCFG0)
+;// <o1.0..3> IDCY: Idle Cycles <0-15>
+;// <o1.5..9> WST1: Wait States 1 <0-31>
+;// <o1.11..15> WST2: Wait States 2 <0-31>
+;// <o1.10> RBLE: Read Byte Lane Enable
+;// <o1.26> WP: Write Protect
+;// <o1.27> BM: Burst ROM
+;// <o1.28..29> MW: Memory Width <0=> 8-bit <1=> 16-bit
+;// <2=> 32-bit <3=> Reserved
+;// </e>
+BCFG0_SETUP EQU 0
+BCFG0_Val EQU 0x0000FBEF
+
+;// <e> Bank Configuration 1 (BCFG1)
+;// <o1.0..3> IDCY: Idle Cycles <0-15>
+;// <o1.5..9> WST1: Wait States 1 <0-31>
+;// <o1.11..15> WST2: Wait States 2 <0-31>
+;// <o1.10> RBLE: Read Byte Lane Enable
+;// <o1.26> WP: Write Protect
+;// <o1.27> BM: Burst ROM
+;// <o1.28..29> MW: Memory Width <0=> 8-bit <1=> 16-bit
+;// <2=> 32-bit <3=> Reserved
+;// </e>
+BCFG1_SETUP EQU 0
+BCFG1_Val EQU 0x0000FBEF
+
+;// <e> Bank Configuration 2 (BCFG2)
+;// <o1.0..3> IDCY: Idle Cycles <0-15>
+;// <o1.5..9> WST1: Wait States 1 <0-31>
+;// <o1.11..15> WST2: Wait States 2 <0-31>
+;// <o1.10> RBLE: Read Byte Lane Enable
+;// <o1.26> WP: Write Protect
+;// <o1.27> BM: Burst ROM
+;// <o1.28..29> MW: Memory Width <0=> 8-bit <1=> 16-bit
+;// <2=> 32-bit <3=> Reserved
+;// </e>
+BCFG2_SETUP EQU 0
+BCFG2_Val EQU 0x0000FBEF
+
+;// <e> Bank Configuration 3 (BCFG3)
+;// <o1.0..3> IDCY: Idle Cycles <0-15>
+;// <o1.5..9> WST1: Wait States 1 <0-31>
+;// <o1.11..15> WST2: Wait States 2 <0-31>
+;// <o1.10> RBLE: Read Byte Lane Enable
+;// <o1.26> WP: Write Protect
+;// <o1.27> BM: Burst ROM
+;// <o1.28..29> MW: Memory Width <0=> 8-bit <1=> 16-bit
+;// <2=> 32-bit <3=> Reserved
+;// </e>
+BCFG3_SETUP EQU 0
+BCFG3_Val EQU 0x0000FBEF
+
+;// </e> End of EMC
+
+
+; External Memory Pins definitions
+PINSEL2 EQU 0xE002C014 ; PINSEL2 Address
+PINSEL2_Val EQU 0x0E6149E4 ; CS0..3, OE, WE, BLS0..3,
+ ; D0..31, A2..23, JTAG Pins
+
+
+ PRESERVE8
+
+
+; Area Definition and Entry Point
+; Startup Code must be linked first at Address at which it expects to run.
+
+ AREA RESET, CODE, READONLY
+ ARM
+
+
+; Exception Vectors
+; Mapped to Address 0.
+; Absolute addressing mode must be used.
+; Dummy Handlers are implemented as infinite loops which can be modified.
+ IMPORT vPortYieldProcessor
+
+Vectors LDR PC, Reset_Addr
+ LDR PC, Undef_Addr
+ LDR PC, SWI_Addr
+ LDR PC, PAbt_Addr
+ LDR PC, DAbt_Addr
+ NOP ; Reserved Vector
+; LDR PC, IRQ_Addr
+ LDR PC, [PC, #-0x0FF0] ; Vector from VicVectAddr
+ LDR PC, FIQ_Addr
+
+Reset_Addr DCD Reset_Handler
+Undef_Addr DCD Undef_Handler
+SWI_Addr DCD vPortYieldProcessor
+PAbt_Addr DCD PAbt_Handler
+DAbt_Addr DCD DAbt_Handler
+ DCD 0 ; Reserved Address
+IRQ_Addr DCD IRQ_Handler
+FIQ_Addr DCD FIQ_Handler
+
+Undef_Handler B Undef_Handler
+SWI_Handler B SWI_Handler
+PAbt_Handler B PAbt_Handler
+DAbt_Handler B DAbt_Handler
+IRQ_Handler B IRQ_Handler
+FIQ_Handler B FIQ_Handler
+
+
+; Reset Handler
+
+ EXPORT Reset_Handler
+Reset_Handler
+
+
+; Setup External Memory Pins
+ IF :DEF:EXTERNAL_MODE
+ LDR R0, =PINSEL2
+ LDR R1, =PINSEL2_Val
+ STR R1, [R0]
+ ENDIF
+
+
+; Setup External Memory Controller
+ IF EMC_SETUP <> 0
+ LDR R0, =EMC_BASE
+
+ IF BCFG0_SETUP <> 0
+ LDR R1, =BCFG0_Val
+ STR R1, [R0, #BCFG0_OFS]
+ ENDIF
+
+ IF BCFG1_SETUP <> 0
+ LDR R1, =BCFG1_Val
+ STR R1, [R0, #BCFG1_OFS]
+ ENDIF
+
+ IF BCFG2_SETUP <> 0
+ LDR R1, =BCFG2_Val
+ STR R1, [R0, #BCFG2_OFS]
+ ENDIF
+
+ IF BCFG3_SETUP <> 0
+ LDR R1, =BCFG3_Val
+ STR R1, [R0, #BCFG3_OFS]
+ ENDIF
+
+ ENDIF ; EMC_SETUP
+
+
+; Setup VPBDIV
+ IF VPBDIV_SETUP <> 0
+ LDR R0, =VPBDIV
+ LDR R1, =VPBDIV_Val
+ STR R1, [R0]
+ ENDIF
+
+
+; Setup PLL
+ IF PLL_SETUP <> 0
+ LDR R0, =PLL_BASE
+ MOV R1, #0xAA
+ MOV R2, #0x55
+
+; Configure and Enable PLL
+ MOV R3, #PLLCFG_Val
+ STR R3, [R0, #PLLCFG_OFS]
+ MOV R3, #PLLCON_PLLE
+ STR R3, [R0, #PLLCON_OFS]
+ STR R1, [R0, #PLLFEED_OFS]
+ STR R2, [R0, #PLLFEED_OFS]
+
+; Wait until PLL Locked
+PLL_Loop LDR R3, [R0, #PLLSTAT_OFS]
+ ANDS R3, R3, #PLLSTAT_PLOCK
+ BEQ PLL_Loop
+
+; Switch to PLL Clock
+ MOV R3, #(PLLCON_PLLE:OR:PLLCON_PLLC)
+ STR R3, [R0, #PLLCON_OFS]
+ STR R1, [R0, #PLLFEED_OFS]
+ STR R2, [R0, #PLLFEED_OFS]
+ ENDIF ; PLL_SETUP
+
+
+; Setup MAM
+ IF MAM_SETUP <> 0
+ LDR R0, =MAM_BASE
+ MOV R1, #MAMTIM_Val
+ STR R1, [R0, #MAMTIM_OFS]
+ MOV R1, #MAMCR_Val
+ STR R1, [R0, #MAMCR_OFS]
+ ENDIF ; MAM_SETUP
+
+
+; Memory Mapping (when Interrupt Vectors are in RAM)
+MEMMAP EQU 0xE01FC040 ; Memory Mapping Control
+ IF :DEF:REMAP
+ LDR R0, =MEMMAP
+ IF :DEF:EXTMEM_MODE
+ MOV R1, #3
+ ELIF :DEF:RAM_MODE
+ MOV R1, #2
+ ELSE
+ MOV R1, #1
+ ENDIF
+ STR R1, [R0]
+ ENDIF
+
+
+; Initialise Interrupt System
+; ...
+
+
+; Setup Stack for each mode
+
+ LDR R0, =Stack_Top
+
+; Enter Undefined Instruction Mode and set its Stack Pointer
+ MSR CPSR_c, #Mode_UND:OR:I_Bit:OR:F_Bit
+ MOV SP, R0
+ SUB R0, R0, #UND_Stack_Size
+
+; Enter Abort Mode and set its Stack Pointer
+ MSR CPSR_c, #Mode_ABT:OR:I_Bit:OR:F_Bit
+ MOV SP, R0
+ SUB R0, R0, #ABT_Stack_Size
+
+; Enter FIQ Mode and set its Stack Pointer
+ MSR CPSR_c, #Mode_FIQ:OR:I_Bit:OR:F_Bit
+ MOV SP, R0
+ SUB R0, R0, #FIQ_Stack_Size
+
+; Enter IRQ Mode and set its Stack Pointer
+ MSR CPSR_c, #Mode_IRQ:OR:I_Bit:OR:F_Bit
+ MOV SP, R0
+ SUB R0, R0, #IRQ_Stack_Size
+
+; Enter Supervisor Mode and set its Stack Pointer
+ MSR CPSR_c, #Mode_SVC:OR:I_Bit:OR:F_Bit
+ MOV SP, R0
+ SUB R0, R0, #SVC_Stack_Size
+
+; Enter the C code
+
+ IMPORT __main
+ LDR R0, =__main
+ BX R0
+
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+; User Initial Stack & Heap
+ AREA |.text|, CODE, READONLY
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + USR_Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDIF
+
+
+ END
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/main.c b/Demo/ARM7_LPC2129_Keil_RVDS/main.c
new file mode 100644
index 0000000000..97010137c5
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/main.c
@@ -0,0 +1,301 @@
+/*
+ FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.
+
+ This file is part of the FreeRTOS.org distribution.
+
+ FreeRTOS.org is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ FreeRTOS.org is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with FreeRTOS.org; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ A special exception to the GPL can be applied should you wish to distribute
+ a combined work that includes FreeRTOS.org, without being obliged to provide
+ the source code for any proprietary components. See the licensing section
+ of http://www.FreeRTOS.org for full details of how and when the exception
+ can be applied.
+
+ ***************************************************************************
+ ***************************************************************************
+ * *
+ * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
+ * and even write all or part of your application on your behalf. *
+ * See http://www.OpenRTOS.com for details of the services we provide to *
+ * expedite your project. *
+ * *
+ ***************************************************************************
+ ***************************************************************************
+
+ Please ensure to read the configuration and relevant port sections of the
+ online documentation.
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
+ The processor MUST be in supervisor mode when vTaskStartScheduler is
+ called. The demo applications included in the FreeRTOS.org download switch
+ to supervisor mode prior to main being called. If you are not using one of
+ these demo application projects then ensure Supervisor mode is used.
+*/
+
+
+/*
+ * Creates all the demo application tasks, then starts the scheduler. The WEB
+ * documentation provides more details of the demo application tasks.
+ *
+ * Main.c also creates a task called "Check". This only executes every three
+ * seconds but has the highest priority so is guaranteed to get processor time.
+ * Its main function is to check that all the other tasks are still operational.
+ * Each task (other than the "flash" tasks) maintains a unique count that is
+ * incremented each time the task successfully completes its function. Should
+ * any error occur within such a task the count is permanently halted. The
+ * check task inspects the count of each task to ensure it has changed since
+ * the last time the check task executed. If all the count variables have
+ * changed all the tasks are still executing error free, and the check task
+ * toggles the onboard LED. Should any task contain an error at any time
+ * the LED toggle rate will change from 3 seconds to 500ms.
+ *
+ */
+
+/* Standard includes. */
+#include <stdlib.h>
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* Demo application includes. */
+#include "partest.h"
+#include "flash.h"
+#include "integer.h"
+#include "comtest2.h"
+#include "serial.h"
+
+#ifdef KEIL_THUMB_INTERWORK
+
+ /*
+ THUMB mode allows more tasks to be created without the executable
+ binary exceeding the limits allowed by the evaluation version of
+ uVision3.
+ */
+ #include "PollQ.h"
+ #include "BlockQ.h"
+ #include "semtest.h"
+ #include "dynamic.h"
+
+#endif /* KEIL_THUMB_INTERWORK */
+
+/*-----------------------------------------------------------*/
+
+/* Constants to setup I/O and processor. */
+#define mainTX_ENABLE ( ( unsigned portLONG ) 0x0001 )
+#define mainRX_ENABLE ( ( unsigned portLONG ) 0x0004 )
+#define mainBUS_CLK_FULL ( ( unsigned portCHAR ) 0x01 )
+#define mainLED_TO_OUTPUT ( ( unsigned portLONG ) 0xff0000 )
+
+/* Constants for the ComTest demo application tasks. */
+#define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 115200 )
+#define mainCOM_TEST_LED ( 3 )
+
+/* Priorities for the demo application tasks. */
+#define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
+#define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
+#define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 4 )
+
+/* Constants used by the "check" task. As described at the head of this file
+the check task toggles an LED. The rate at which the LED flashes is used to
+indicate whether an error has been detected or not. If the LED toggles every
+3 seconds then no errors have been detected. If the rate increases to 500ms
+then an error has been detected in at least one of the demo application tasks. */
+#define mainCHECK_LED ( 7 )
+#define mainNO_ERROR_FLASH_PERIOD ( ( portTickType ) 3000 / portTICK_RATE_MS )
+#define mainERROR_FLASH_PERIOD ( ( portTickType ) 500 / portTICK_RATE_MS )
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Checks that all the demo application tasks are still executing without error
+ * - as described at the top of the file.
+ */
+static portLONG prvCheckOtherTasksAreStillRunning( void );
+
+/*
+ * The task that executes at the highest priority and calls
+ * prvCheckOtherTasksAreStillRunning(). See the description at the top
+ * of the file.
+ */
+static void vErrorChecks( void *pvParameters );
+
+/*
+ * Configure the processor for use with the Keil demo board. This is very
+ * minimal as most of the setup is managed by the settings in the project
+ * file.
+ */
+static void prvSetupHardware( void );
+
+/*-----------------------------------------------------------*/
+
+
+
+/*
+ * Application entry point:
+ * Starts all the other tasks, then starts the scheduler.
+ */
+int main( void )
+{
+ /* Setup the hardware for use with the Keil demo board. */
+ prvSetupHardware();
+
+ /* Start the demo/test application tasks. */
+ vStartIntegerMathTasks( tskIDLE_PRIORITY );
+ vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
+ vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
+
+ #ifdef KEIL_THUMB_INTERWORK
+ /* When using THUMB mode we can start more tasks without the executable
+ exceeding the size limit imposed by the evaluation version of uVision3. */
+ vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
+ vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
+ vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
+ vStartDynamicPriorityTasks();
+ #endif
+
+ /* Start the check task - which is defined in this file. This is the task
+ that periodically checks to see that all the other tasks are executing
+ without error. */
+ xTaskCreate( vErrorChecks, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
+
+ /* Now all the tasks have been started - start the scheduler.
+
+ NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
+ The processor MUST be in supervisor mode when vTaskStartScheduler is
+ called. The demo applications included in the FreeRTOS.org download switch
+ to supervisor mode prior to main being called. If you are not using one of
+ these demo application projects then ensure Supervisor mode is used here. */
+ vTaskStartScheduler();
+
+ /* Should never reach here! If you do then there was not enough heap
+ available for the idle task to be created. */
+ for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+static void vErrorChecks( void *pvParameters )
+{
+portTickType xDelayPeriod = mainNO_ERROR_FLASH_PERIOD;
+
+ /* Parameters are not used. */
+ ( void ) pvParameters;
+
+ /* Cycle for ever, delaying then checking all the other tasks are still
+ operating without error. If an error is detected then the delay period
+ is decreased from mainNO_ERROR_FLASH_PERIOD to mainERROR_FLASH_PERIOD so
+ the on board LED flash rate will increase.
+
+ This task runs at the highest priority. */
+
+ for( ;; )
+ {
+ /* The period of the delay depends on whether an error has been
+ detected or not. If an error has been detected then the period
+ is reduced to increase the LED flash rate. */
+ vTaskDelay( xDelayPeriod );
+
+ if( prvCheckOtherTasksAreStillRunning() != pdPASS )
+ {
+ /* An error has been detected in one of the tasks - flash faster. */
+ xDelayPeriod = mainERROR_FLASH_PERIOD;
+ }
+
+ /* Toggle the LED before going back to wait for the next cycle. */
+ vParTestToggleLED( mainCHECK_LED );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvSetupHardware( void )
+{
+ /* Perform the hardware setup required. This is minimal as most of the
+ setup is managed by the settings in the project file. */
+
+ /* Configure the RS2332 pins. All other pins remain at their default of 0. */
+ PINSEL0 |= mainTX_ENABLE;
+ PINSEL0 |= mainRX_ENABLE;
+
+ /* LED pins need to be output. */
+ IODIR1 = mainLED_TO_OUTPUT;
+
+ /* Setup the peripheral bus to be the same as the PLL output. */
+ VPBDIV = mainBUS_CLK_FULL;
+}
+/*-----------------------------------------------------------*/
+
+static portLONG prvCheckOtherTasksAreStillRunning( void )
+{
+portLONG lReturn = pdPASS;
+
+ /* Check all the demo tasks (other than the flash tasks) to ensure
+ that they are all still running, and that none of them have detected
+ an error. */
+ if( xAreIntegerMathsTaskStillRunning() != pdPASS )
+ {
+ lReturn = pdFAIL;
+ }
+
+ if( xAreComTestTasksStillRunning() != pdPASS )
+ {
+ lReturn = pdFAIL;
+ }
+
+ #ifdef KEIL_THUMB_INTERWORK
+
+ /* When using THUMB mode we can start more tasks without the executable
+ exceeding the size limit imposed by the evaluation version of uVision3. */
+
+ if( xArePollingQueuesStillRunning() != pdTRUE )
+ {
+ lReturn = pdFAIL;
+ }
+
+ if( xAreBlockingQueuesStillRunning() != pdTRUE )
+ {
+ lReturn = pdFAIL;
+ }
+
+ if( xAreSemaphoreTasksStillRunning() != pdTRUE )
+ {
+ lReturn = pdFAIL;
+ }
+
+ if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
+ {
+ lReturn = pdFAIL;
+ }
+
+ #endif
+
+ return lReturn;
+}
+/*-----------------------------------------------------------*/
+
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/serial/serial.c b/Demo/ARM7_LPC2129_Keil_RVDS/serial/serial.c
new file mode 100644
index 0000000000..dd5b9b0d18
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/serial/serial.c
@@ -0,0 +1,324 @@
+/*
+ FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.
+
+ This file is part of the FreeRTOS.org distribution.
+
+ FreeRTOS.org is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ FreeRTOS.org is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with FreeRTOS.org; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ A special exception to the GPL can be applied should you wish to distribute
+ a combined work that includes FreeRTOS.org, without being obliged to provide
+ the source code for any proprietary components. See the licensing section
+ of http://www.FreeRTOS.org for full details of how and when the exception
+ can be applied.
+
+ ***************************************************************************
+ ***************************************************************************
+ * *
+ * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
+ * and even write all or part of your application on your behalf. *
+ * See http://www.OpenRTOS.com for details of the services we provide to *
+ * expedite your project. *
+ * *
+ ***************************************************************************
+ ***************************************************************************
+
+ Please ensure to read the configuration and relevant port sections of the
+ online documentation.
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+/*
+ BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
+
+ Note this driver is used to test the FreeRTOS port. It is NOT intended to
+ be an example of an efficient implementation!
+*/
+
+/* Standard includes. */
+#include <stdlib.h>
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "queue.h"
+#include "task.h"
+
+/* Demo application includes. */
+#include "serial.h"
+
+/*-----------------------------------------------------------*/
+
+/* Constants to setup and access the UART. */
+#define serDLAB ( ( unsigned portCHAR ) 0x80 )
+#define serENABLE_INTERRUPTS ( ( unsigned portCHAR ) 0x03 )
+#define serNO_PARITY ( ( unsigned portCHAR ) 0x00 )
+#define ser1_STOP_BIT ( ( unsigned portCHAR ) 0x00 )
+#define ser8_BIT_CHARS ( ( unsigned portCHAR ) 0x03 )
+#define serFIFO_ON ( ( unsigned portCHAR ) 0x01 )
+#define serCLEAR_FIFO ( ( unsigned portCHAR ) 0x06 )
+#define serWANTED_CLOCK_SCALING ( ( unsigned portLONG ) 16 )
+
+/* Constants to setup and access the VIC. */
+#define serU0VIC_CHANNEL ( ( unsigned portLONG ) 0x0006 )
+#define serU0VIC_CHANNEL_BIT ( ( unsigned portLONG ) 0x0040 )
+#define serU0VIC_ENABLE ( ( unsigned portLONG ) 0x0020 )
+
+/* Misc. */
+#define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
+#define serHANDLE ( ( xComPortHandle ) 1 )
+#define serNO_BLOCK ( ( portTickType ) 0 )
+
+/* Constant to access the VIC. */
+#define serCLEAR_VIC_INTERRUPT ( ( unsigned portLONG ) 0 )
+
+/* Constants to determine the ISR source. */
+#define serSOURCE_THRE ( ( unsigned portCHAR ) 0x02 )
+#define serSOURCE_RX_TIMEOUT ( ( unsigned portCHAR ) 0x0c )
+#define serSOURCE_ERROR ( ( unsigned portCHAR ) 0x06 )
+#define serSOURCE_RX ( ( unsigned portCHAR ) 0x04 )
+#define serINTERRUPT_SOURCE_MASK ( ( unsigned portCHAR ) 0x0f )
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The asm wrapper for the interrupt service routine.
+ */
+extern void vUART_ISREntry(void);
+
+/*
+ * The C function called from the asm wrapper.
+ */
+void vUART_ISRHandler( void );
+
+/*-----------------------------------------------------------*/
+
+/* Queues used to hold received characters, and characters waiting to be
+transmitted. */
+static xQueueHandle xRxedChars;
+static xQueueHandle xCharsForTx;
+
+/* Communication flag between the interrupt service routine and serial API. */
+static volatile portLONG lTHREEmpty;
+
+/*-----------------------------------------------------------*/
+
+xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
+{
+unsigned portLONG ulDivisor, ulWantedClock;
+xComPortHandle xReturn = serHANDLE;
+
+ /* Create the queues used to hold Rx and Tx characters. */
+ xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
+ xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
+
+ /* Initialise the THRE empty flag. */
+ lTHREEmpty = pdTRUE;
+
+ if(
+ ( xRxedChars != serINVALID_QUEUE ) &&
+ ( xCharsForTx != serINVALID_QUEUE ) &&
+ ( ulWantedBaud != ( unsigned portLONG ) 0 )
+ )
+ {
+ portENTER_CRITICAL()
+ {
+ /* Setup the baud rate: Calculate the divisor value. */
+ ulWantedClock = ulWantedBaud * serWANTED_CLOCK_SCALING;
+ ulDivisor = configCPU_CLOCK_HZ / ulWantedClock;
+
+ /* Set the DLAB bit so we can access the divisor. */
+ U0LCR |= serDLAB;
+
+ /* Setup the divisor. */
+ U0DLL = ( unsigned portCHAR ) ( ulDivisor & ( unsigned portLONG ) 0xff );
+ ulDivisor >>= 8;
+ U0DLM = ( unsigned portCHAR ) ( ulDivisor & ( unsigned portLONG ) 0xff );
+
+ /* Turn on the FIFO's and clear the buffers. */
+ U0FCR = ( serFIFO_ON | serCLEAR_FIFO );
+
+ /* Setup transmission format. */
+ U0LCR = serNO_PARITY | ser1_STOP_BIT | ser8_BIT_CHARS;
+
+ /* Setup the VIC for the UART. */
+ VICIntSelect &= ~( serU0VIC_CHANNEL_BIT );
+ VICIntEnable |= serU0VIC_CHANNEL_BIT;
+ VICVectAddr1 = ( unsigned portLONG ) vUART_ISREntry;
+ VICVectCntl1 = serU0VIC_CHANNEL | serU0VIC_ENABLE;
+
+ /* Enable UART0 interrupts. */
+ U0IER |= serENABLE_INTERRUPTS;
+ }
+ portEXIT_CRITICAL();
+ }
+ else
+ {
+ xReturn = ( xComPortHandle ) 0;
+ }
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
+{
+ /* The port handle is not required as this driver only supports UART0. */
+ ( void ) pxPort;
+
+ /* Get the next character from the buffer. Return false if no characters
+ are available, or arrive before xBlockTime expires. */
+ if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
+ {
+ return pdTRUE;
+ }
+ else
+ {
+ return pdFALSE;
+ }
+}
+/*-----------------------------------------------------------*/
+
+void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength )
+{
+signed portCHAR *pxNext;
+
+ /* NOTE: This implementation does not handle the queue being full as no
+ block time is used! */
+
+ /* The port handle is not required as this driver only supports UART0. */
+ ( void ) pxPort;
+ ( void ) usStringLength;
+
+ /* Send each character in the string, one at a time. */
+ pxNext = ( signed portCHAR * ) pcString;
+ while( *pxNext )
+ {
+ xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
+ pxNext++;
+ }
+}
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
+{
+signed portBASE_TYPE xReturn;
+
+ /* The port handle is not required as this driver only supports UART0. */
+ ( void ) pxPort;
+
+ portENTER_CRITICAL();
+ {
+ /* Is there space to write directly to the UART? */
+ if( lTHREEmpty == ( portLONG ) pdTRUE )
+ {
+ /* We wrote the character directly to the UART, so was
+ successful. */
+ lTHREEmpty = pdFALSE;
+ U0THR = cOutChar;
+ xReturn = pdPASS;
+ }
+ else
+ {
+ /* We cannot write directly to the UART, so queue the character.
+ Block for a maximum of xBlockTime if there is no space in the
+ queue. It is ok to block within a critical section as each
+ task has it's own critical section management. */
+ xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime );
+
+ /* Depending on queue sizing and task prioritisation: While we
+ were blocked waiting to post interrupts were not disabled. It is
+ possible that the serial ISR has emptied the Tx queue, in which
+ case we need to start the Tx off again. */
+ if( lTHREEmpty == ( portLONG ) pdTRUE )
+ {
+ xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK );
+ lTHREEmpty = pdFALSE;
+ U0THR = cOutChar;
+ }
+ }
+ }
+ portEXIT_CRITICAL();
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vUART_ISRHandler( void )
+{
+signed portCHAR cChar;
+portBASE_TYPE xTaskWokenByRx, xTaskWokenByTx;
+
+ xTaskWokenByTx = pdFALSE;
+ xTaskWokenByRx = pdFALSE;
+
+ /* What caused the interrupt? */
+ switch( U0IIR & serINTERRUPT_SOURCE_MASK )
+ {
+ case serSOURCE_ERROR : /* Not handling this, but clear the interrupt. */
+ cChar = U0LSR;
+ break;
+
+ case serSOURCE_THRE : /* The THRE is empty. If there is another
+ character in the Tx queue, send it now. */
+ if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWokenByTx ) == pdTRUE )
+ {
+ U0THR = cChar;
+ }
+ else
+ {
+ /* There are no further characters
+ queued to send so we can indicate
+ that the THRE is available. */
+ lTHREEmpty = pdTRUE;
+ }
+ break;
+
+ case serSOURCE_RX_TIMEOUT :
+ case serSOURCE_RX : /* A character was received. Place it in
+ the queue of received characters. */
+ cChar = U0RBR;
+ if( xQueueSendFromISR( xRxedChars, &cChar, pdFALSE ) )
+ {
+ xTaskWokenByRx = pdTRUE;
+ }
+ break;
+
+ default : /* There is nothing to do, leave the ISR. */
+ break;
+ }
+
+ /* Clear the ISR in the VIC. */
+ VICVectAddr = serCLEAR_VIC_INTERRUPT;
+
+ /* Exit the ISR. If a task was woken by either a character being received
+ or transmitted then a context switch will occur. */
+ portEXIT_SWITCHING_ISR( ( xTaskWokenByTx || xTaskWokenByRx ) );
+}
+/*-----------------------------------------------------------*/
+
+
+
+
+
+
+
diff --git a/Demo/ARM7_LPC2129_Keil_RVDS/serial/serialISR.s b/Demo/ARM7_LPC2129_Keil_RVDS/serial/serialISR.s
new file mode 100644
index 0000000000..6fa78c8587
--- /dev/null
+++ b/Demo/ARM7_LPC2129_Keil_RVDS/serial/serialISR.s
@@ -0,0 +1,85 @@
+;/*
+; FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.
+;
+; This file is part of the FreeRTOS.org distribution.
+;
+; FreeRTOS.org is free software; you can redistribute it and/or modify
+; it under the terms of the GNU General Public License as published by
+; the Free Software Foundation; either version 2 of the License, or
+; (at your option) any later version.
+;
+; FreeRTOS.org is distributed in the hope that it will be useful,
+; but WITHOUT ANY WARRANTY; without even the implied warranty of
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+; GNU General Public License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with FreeRTOS.org; if not, write to the Free Software
+; Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+;
+; A special exception to the GPL can be applied should you wish to distribute
+; a combined work that includes FreeRTOS.org, without being obliged to provide
+; the source code for any proprietary components. See the licensing section
+; of http://www.FreeRTOS.org for full details of how and when the exception
+; can be applied.
+;
+; ***************************************************************************
+; ***************************************************************************
+; * *
+; * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
+; * and even write all or part of your application on your behalf. *
+; * See http://www.OpenRTOS.com for details of the services we provide to *
+; * expedite your project. *
+; * *
+; ***************************************************************************
+; ***************************************************************************
+;
+; Please ensure to read the configuration and relevant port sections of the
+; online documentation.
+;
+; http://www.FreeRTOS.org - Documentation, latest information, license and
+; contact details.
+;
+; http://www.SafeRTOS.com - A version that is certified for use in safety
+; critical systems.
+;
+; http://www.OpenRTOS.com - Commercial support, development, porting,
+; licensing and training services.
+;*/
+
+ INCLUDE portmacro.inc
+
+ ;The UART interrupt entry point is defined within an assembly wrapper
+ ;within this file. This takes care of the task context saving before it
+ ;calls the main handler (vUART_ISRHandler()) which is written in C within
+ ;serial.c. The execution of the handler can unblock tasks that were blocked
+ ;waiting for UART events. Once the handler completes the asm wrapper
+ ;finishes off by restoring the context of whichever task is now selected to
+ ;enter the RUNNING state (which might now be a different task to that which
+ ;was originally interrupted.
+ IMPORT vUART_ISRHandler
+ EXPORT vUART_ISREntry
+
+ ;/* Interrupt entry must always be in ARM mode. */
+ AREA |.text|, CODE, READONLY
+ ARM
+ PRESERVE8
+
+
+
+vUART_ISREntry
+
+ ; Save the context of the interrupted task.
+ portSAVE_CONTEXT
+
+ ; Call the C handler function - defined within serial.c.
+ LDR R0, =vUART_ISRHandler
+ MOV LR, PC
+ BX R0
+
+ ; Finish off by restoring the context of the task that has been chosen to
+ ; run next - which might be a different task to that which was originally
+ ; interrupted.
+ portRESTORE_CONTEXT
+
+ END