Files
2019-08-30 20:58:32 +08:00

254 lines
8.1 KiB
C

// Copyright 2018-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_SYSTEM_H__
#define __ESP_SYSTEM_H__
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "sdkconfig.h"
#ifdef __cplusplus
extern "C" {
#endif
#if CONFIG_CRYSTAL_USED_26MHZ
#define CRYSTAL_USED 26
#endif
#if CONFIG_CRYSTAL_USED_40MHZ
#define CRYSTAL_USED 40
#endif
typedef enum {
ESP_MAC_WIFI_STA,
ESP_MAC_WIFI_SOFTAP,
} esp_mac_type_t;
/**
* @brief Reset reasons
*/
typedef enum {
ESP_RST_UNKNOWN = 0, //!< Reset reason can not be determined
ESP_RST_POWERON, //!< Reset due to power-on event
ESP_RST_EXT, //!< Reset by external pin (not applicable for ESP8266)
ESP_RST_SW, //!< Software reset via esp_restart
ESP_RST_PANIC, //!< Software reset due to exception/panic
ESP_RST_INT_WDT, //!< Reset (software or hardware) due to interrupt watchdog
ESP_RST_TASK_WDT, //!< Reset due to task watchdog
ESP_RST_WDT, //!< Reset due to other watchdogs
ESP_RST_DEEPSLEEP, //!< Reset after exiting deep sleep mode
ESP_RST_BROWNOUT, //!< Brownout reset (software or hardware)
ESP_RST_SDIO, //!< Reset over SDIO
} esp_reset_reason_t;
/**
* @brief Set base MAC address with the MAC address which is stored in EFUSE or
* external storage e.g. flash and EEPROM.
*
* Base MAC address is used to generate the MAC addresses used by the networking interfaces.
* If using base MAC address stored in EFUSE or external storage, call this API to set base MAC
* address with the MAC address which is stored in EFUSE or external storage before initializing
* WiFi.
*
* @param mac base MAC address, length: 6 bytes.
*
* @return ESP_OK on success
*/
esp_err_t esp_base_mac_addr_set(uint8_t *mac);
/**
* @brief Return base MAC address which is set using esp_base_mac_addr_set.
*
* @param mac base MAC address, length: 6 bytes.
*
* @return ESP_OK on success
* ESP_ERR_INVALID_MAC base MAC address has not been set
*/
esp_err_t esp_base_mac_addr_get(uint8_t *mac);
/**
* @brief Return base MAC address which is factory-programmed by Espressif in EFUSE.
*
* @param mac base MAC address, length: 6 bytes.
*
* @return ESP_OK on success
*/
esp_err_t esp_efuse_mac_get_default(uint8_t *mac);
/**
* @brief Read base MAC address and set MAC address of the interface.
*
* This function first get base MAC address using esp_base_mac_addr_get or reads base MAC address
* from EFUSE. Then set the MAC address of the interface including wifi station and wifi softap.
*
* @param mac MAC address of the interface, length: 6 bytes.
* @param type type of MAC address, 0:wifi station, 1:wifi softap.
*
* @return ESP_OK on success
*/
esp_err_t esp_read_mac(uint8_t* mac, esp_mac_type_t type);
/**
* @brief Derive local MAC address from universal MAC address.
*
* This function derives a local MAC address from an universal MAC address.
* A `definition of local vs universal MAC address can be found on Wikipedia
* <https://en.wikipedia.org/wiki/MAC_address#Universal_vs._local>`.
* In ESP8266, universal MAC address is generated from base MAC address in EFUSE or other external storage.
* Local MAC address is derived from the universal MAC address.
*
* @param local_mac Derived local MAC address, length: 6 bytes.
* @param universal_mac Source universal MAC address, length: 6 bytes.
*
* @return ESP_OK on success
*/
esp_err_t esp_derive_local_mac(uint8_t* local_mac, const uint8_t* universal_mac);
/**
* @brief CPU frequency values
*/
typedef enum {
ESP_CPU_FREQ_80M = 1, //!< 80 MHz
ESP_CPU_FREQ_160M = 2, //!< 160 MHz
} esp_cpu_freq_t;
/**
* @brief Switch CPU frequency
*
* If a PLL-derived frequency is requested (80, 160), this function
* will enable the PLL. Otherwise, PLL will be disabled.
* Note: this function is not optimized for switching speed. It may take several
* hundred microseconds to perform frequency switch.
*
* @param cpu_freq new CPU frequency
*/
void esp_set_cpu_freq(esp_cpu_freq_t cpu_freq);
/**
* @brief Reset to default settings.
*/
void system_restore(void) __attribute__ ((noreturn));
/**
* @brief Restart CPU.
*
* This function does not return.
*/
void esp_restart(void) __attribute__ ((noreturn));
/**
* @brief Get reason of last reset
* @return See description of esp_reset_reason_t for explanation of each value.
*/
esp_reset_reason_t esp_reset_reason(void);
/**
* @brief Get the size of available heap.
*
* Note that the returned value may be larger than the maximum contiguous block
* which can be allocated.
*
* @return Available heap size, in bytes.
*/
uint32_t esp_get_free_heap_size(void);
/**
* @brief Get the minimum heap that has ever been available
*
* @return Minimum free heap ever available
*/
uint32_t esp_get_minimum_free_heap_size( void );
/**
* @brief Get one random 32-bit word from hardware RNG
*
* @return Random value between 0 and UINT32_MAX
*/
uint32_t esp_random(void);
/**
* Get IDF version
*
* @return constant string from IDF_VER
*/
const char* esp_get_idf_version(void);
typedef enum {
FLASH_SIZE_4M_MAP_256_256 = 0, /**< Flash size : 4Mbits. Map : 256KBytes + 256KBytes */
FLASH_SIZE_2M, /**< Flash size : 2Mbits. Map : 256KBytes */
FLASH_SIZE_8M_MAP_512_512, /**< Flash size : 8Mbits. Map : 512KBytes + 512KBytes */
FLASH_SIZE_16M_MAP_512_512, /**< Flash size : 16Mbits. Map : 512KBytes + 512KBytes */
FLASH_SIZE_32M_MAP_512_512, /**< Flash size : 32Mbits. Map : 512KBytes + 512KBytes */
FLASH_SIZE_16M_MAP_1024_1024, /**< Flash size : 16Mbits. Map : 1024KBytes + 1024KBytes */
FLASH_SIZE_32M_MAP_1024_1024, /**< Flash size : 32Mbits. Map : 1024KBytes + 1024KBytes */
FLASH_SIZE_32M_MAP_2048_2048, /**< attention: don't support now ,just compatible for nodemcu;
Flash size : 32Mbits. Map : 2048KBytes + 2048KBytes */
FLASH_SIZE_64M_MAP_1024_1024, /**< Flash size : 64Mbits. Map : 1024KBytes + 1024KBytes */
FLASH_SIZE_128M_MAP_1024_1024, /**< Flash size : 128Mbits. Map : 1024KBytes + 1024KBytes */
FALSH_SIZE_MAP_MAX
} flash_size_map;
/**
* @brief Chip models
*/
typedef enum {
CHIP_ESP8266 = 0, //!< ESP8266
CHIP_ESP32 = 1, //!< ESP32
} esp_chip_model_t;
/**
* Chip feature flags, used in esp_chip_info_t
*/
#define CHIP_FEATURE_EMB_FLASH BIT(0) //!< Chip has embedded flash memory
#define CHIP_FEATURE_WIFI_BGN BIT(1) //!< Chip has 2.4GHz WiFi
#define CHIP_FEATURE_BLE BIT(4) //!< Chip has Bluetooth LE
#define CHIP_FEATURE_BT BIT(5) //!< Chip has Bluetooth Classic
/**
* @brief The structure represents information about the chip
*/
typedef struct {
esp_chip_model_t model; //!< chip model, one of esp_chip_model_t
uint32_t features; //!< bit mask of CHIP_FEATURE_x feature flags
uint8_t cores; //!< number of CPU cores
uint8_t revision; //!< chip revision number
} esp_chip_info_t;
/**
* @brief Fill an esp_chip_info_t structure with information about the chip
* @param[out] out_info structure to be filled
*/
void esp_chip_info(esp_chip_info_t* out_info);
/**
* @brief Get the current Flash size and Flash map.
*
* Flash map depends on the selection when compiling, more details in document
* "2A-ESP8266__IOT_SDK_User_Manual"
*
* @return enum flash_size_map
*/
flash_size_map system_get_flash_size_map(void);
#ifdef __cplusplus
}
#endif
#endif /* __ESP_SYSTEM_H__ */