espressif/ESP8266_RTOS_SDK
1
0
Fork 0
mirror of https://github.com/espressif/ESP8266_RTOS_SDK.git synced 2025-05-22 01:27:11 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
ESP8266_RTOS_SDK/components/esp8266/driver/pwm.c

614 lines
21 KiB
C
Raw Blame History

// Copyright 2018-2025 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "esp_err.h"
#include "esp_log.h"
#include "esp8266/eagle_soc.h"
#include "esp8266/gpio_register.h"
#include "esp8266/pin_mux_register.h"
#include "esp_heap_caps.h"
#include "driver/pwm.h"
#include "driver/gpio.h"
// Temporary use the FreeRTOS critical function
#include "FreeRTOS.h"
#define ENTER_CRITICAL() portENTER_CRITICAL()
#define EXIT_CRITICAL() portEXIT_CRITICAL()
static const char *TAG = "pwm";
#define PWM_CHECK(a, str, ret) if(!(a)) { \
ESP_LOGE(TAG,"%s:%d (%s):%s", __FILE__, __LINE__, __FUNCTION__, str); \
return (ret); \
}
#define MAX_PWM_CHANNEL (8)
#define US_TO_MAC_TICK(t) (t)
#define US_TO_TICKS(t) US_TO_MAC_TICK(t)
// Time to switch PWM ahead of time
#define AHEAD_TICKS0 0
// Advance timing of the timer
#define AHEAD_TICKS1 8
// The time that remains in the interrupt function (the adjacent target loops in the interrupt)
#define AHEAD_TICKS2 10
// Minimum timing time
#define AHEAD_TICKS3 2
#define MAX_TICKS 10000000ul
#define WDEVTSF0_TIME_LO 0x3ff21004
#define WDEVTSF0_TIME_HI 0x3ff21008
#define WDEVTSFSW0_LO 0x3ff21018
#define WDEVTSFSW0_HI 0x3ff2101C
#define WDEVTSF0_TIMER_LO 0x3ff2109c
#define WDEVTSF0_TIMER_HI 0x3ff210a0
#define WDEVTSF0TIMER_ENA 0x3ff21098
#define WDEV_TSF0TIMER_ENA BIT(31)
#define PWM_VERSION "PWM v3.2"
typedef struct {
uint32_t duty; /*!< pwm duty for each channel */
int16_t phase; /*!< pwm phase for each channel */
uint8_t io_num; /*!< pwm io_num for each channel */
} pwm_info_t;
typedef struct {
uint16_t io_mask; /*!< gpio num for each channel */
uint32_t post_edg_time; /*!< positive edge time for each channel */
uint32_t neg_edg_time; /*!< negative edge time for each channel */
} pwm_channel_param_t;
typedef struct {
uint32_t edg_time; /*!< change the output level at this edge time */
uint16_t io_set_mask; /*!< which gpio needs to change high level at this edge time */
uint16_t io_clr_mask; /*!< which gpio needs to change low level at this edge time */
} pwm_param_t;
typedef struct {
uint8_t run_channel_num; /*!< pwm run channel num */
pwm_param_t *run_pwm_param; /*!< pwm param for each channel */
} run_pwm_single_t;
typedef struct {
uint32_t depth;
uint8_t start_flag;
uint8_t init_flag;
uint16_t channel_invert_bitmap;
pwm_channel_param_t *channel;
pwm_param_t *param;
pwm_info_t *pwm_info;
run_pwm_single_t run_pwm[2];
uint32_t period;
uint8_t channel_num;
uint8_t update_done;
uint8_t run_pwm_toggle;
uint8_t current_channel;
uint16_t start_set_mask;
uint16_t start_clr_mask;
uint16_t local_channel;
uint16_t gpio_bit_mask;
uint32_t this_target;
run_pwm_single_t *single;
} pwm_obj_t;
pwm_obj_t *pwm_obj = NULL;
int wDev_MacTimSetFunc(void (*handle)(void));
static void pwm_phase_init(void)
{
int32_t time_delay;
uint8_t i;
for (i = 0; i < pwm_obj->channel_num; i++) {
if (-180 < pwm_obj->pwm_info[i].phase && pwm_obj->pwm_info[i].phase < 0) {
time_delay = 0 - ((0 - pwm_obj->pwm_info[i].phase) * pwm_obj->depth / 360);
} else if (pwm_obj->pwm_info[i].phase == 0) {
continue;
} else if (180 > pwm_obj->pwm_info[i].phase && pwm_obj->pwm_info[i].phase > 0) {
time_delay = pwm_obj->pwm_info[i].phase * pwm_obj->depth / 360;
} else {
ESP_LOGE(TAG, "channel[%d] phase error %d, valid ramge from (-180,180)\n", i, pwm_obj->pwm_info[i].phase);
continue;
}
pwm_obj->channel[i].post_edg_time = (time_delay + pwm_obj->channel[i].post_edg_time + pwm_obj->depth) % pwm_obj->depth;
pwm_obj->channel[i].neg_edg_time = (time_delay + pwm_obj->channel[i].neg_edg_time + pwm_obj->depth) % pwm_obj->depth;
}
}
static void pwm_insert_sort(void)
{
uint8_t i;
pwm_param_t tmp;
for (i = 1; i < pwm_obj->channel_num * 2; i++) {
if (pwm_obj->param[i].edg_time < pwm_obj->param[i - 1].edg_time) {
int32_t j = i - 1;
memcpy((void *)&tmp, (void *)&pwm_obj->param[i], sizeof(pwm_param_t));
while (j >= 0 && pwm_obj->param[j].edg_time > tmp.edg_time) {
memcpy(&pwm_obj->param[j + 1], &pwm_obj->param[j], sizeof(pwm_param_t));
j--;
}
memcpy(&pwm_obj->param[j + 1], &tmp, sizeof(pwm_param_t));
}
}
}
esp_err_t pwm_set_period(uint32_t period)
{
PWM_CHECK(period >= 10, "period setting is too short", ESP_ERR_INVALID_ARG);
pwm_obj->period = period;
return ESP_OK;
}
esp_err_t pwm_get_period(uint32_t *period_p)
{
PWM_CHECK(NULL != period_p, "Pointer is empty", ESP_ERR_INVALID_ARG);
*period_p = pwm_obj->period;
return ESP_OK;
}
esp_err_t pwm_set_channel_invert(uint16_t channel_mask)
{
PWM_CHECK((channel_mask >> pwm_obj->channel_num) == 0, "invalid channel_mask", ESP_ERR_INVALID_ARG);
pwm_obj->channel_invert_bitmap = channel_mask;
return ESP_OK;
}
esp_err_t pwm_clear_channel_invert(uint16_t channel_mask)
{
PWM_CHECK((channel_mask >> pwm_obj->channel_num) == 0, "invalid channel_mask", ESP_ERR_INVALID_ARG);
pwm_obj->channel_invert_bitmap = pwm_obj->channel_invert_bitmap & (~channel_mask);
return ESP_OK;
}
esp_err_t pwm_set_duty(uint8_t channel_num, uint32_t duty)
{
PWM_CHECK(channel_num < pwm_obj->channel_num, "Channel num error", ESP_ERR_INVALID_ARG);
pwm_obj->pwm_info[channel_num].duty = duty;
return ESP_OK;
}
esp_err_t pwm_set_duties(uint32_t *duties)
{
uint8_t i;
PWM_CHECK(NULL != duties, "Pointer is empty", ESP_ERR_INVALID_ARG);
for (i = 0; i < pwm_obj->channel_num; i++) {
pwm_obj->pwm_info[i].duty = duties[i];
}
return ESP_OK;
}
esp_err_t pwm_get_duty(uint8_t channel_num, uint32_t *duty_p)
{
PWM_CHECK(channel_num < pwm_obj->channel_num, "Channel num error", ESP_ERR_INVALID_ARG);
PWM_CHECK(NULL != duty_p, "Pointer is empty", ESP_ERR_INVALID_ARG);
*duty_p = pwm_obj->pwm_info[channel_num].duty;
return ESP_OK;
}
esp_err_t pwm_set_period_duties(uint32_t period, uint32_t *duties)
{
PWM_CHECK(NULL != duties, "Pointer is empty", ESP_ERR_INVALID_ARG);
pwm_set_period(period);
pwm_set_duties(duties);
return ESP_OK;
}
esp_err_t pwm_set_phase(uint8_t channel_num, int16_t phase)
{
PWM_CHECK(channel_num < pwm_obj->channel_num, "Channel num error", ESP_ERR_INVALID_ARG);
pwm_obj->pwm_info[channel_num].phase = phase;
return ESP_OK;
}
esp_err_t pwm_set_phases(int16_t *phases)
{
uint8_t i;
PWM_CHECK(NULL != phases, "Pointer is empty", ESP_ERR_INVALID_ARG);
for (i = 0; i < pwm_obj->channel_num; i++) {
pwm_obj->pwm_info[i].phase = phases[i];
}
return ESP_OK;
}
esp_err_t pwm_get_phase(uint8_t channel_num, uint16_t *phase_p)
{
PWM_CHECK(channel_num < pwm_obj->channel_num, "Channel num error", ESP_ERR_INVALID_ARG);
PWM_CHECK(NULL != phase_p, "Pointer is empty", ESP_ERR_INVALID_ARG);
*phase_p = pwm_obj->pwm_info[channel_num].phase;
return ESP_OK;
}
static void pwm_timer_enable(uint8_t enable)
{
if (0 == enable) {
ENTER_CRITICAL();
REG_WRITE(WDEVTSF0TIMER_ENA, REG_READ(WDEVTSF0TIMER_ENA) & (~WDEV_TSF0TIMER_ENA));
EXIT_CRITICAL();
} else {
REG_WRITE(WDEVTSF0TIMER_ENA, WDEV_TSF0TIMER_ENA);
}
}
static void IRAM_ATTR pwm_timer_intr_handler(void)
{
//process continous event
uint32_t mask = REG_READ(PERIPHS_GPIO_BASEADDR + GPIO_OUT_ADDRESS);
// In the interrupt handler, first check for data updates, then switch to the updated array at the end of a cycle, start outputting new PWM waveforms, and clear the update flag.
while (1) {
if (REG_READ(WDEVTSF0_TIME_LO) + AHEAD_TICKS2 < pwm_obj->this_target) {
break;
} else {
//wait timer comes
while ((REG_READ(WDEVTSF0_TIME_LO) + AHEAD_TICKS0) < pwm_obj->this_target && (pwm_obj->this_target < MAX_TICKS));
if (pwm_obj->current_channel == 0) {
if (pwm_obj->update_done == 1) {
pwm_obj->single = &pwm_obj->run_pwm[pwm_obj->run_pwm_toggle];
pwm_obj->run_pwm_toggle = (pwm_obj->run_pwm_toggle ^ 0x1);
pwm_obj->update_done = 0;
}
mask = mask & (~pwm_obj->single->run_pwm_param[pwm_obj->single->run_channel_num - 1].io_clr_mask);
mask = mask | pwm_obj->single->run_pwm_param[pwm_obj->single->run_channel_num - 1].io_set_mask;
REG_WRITE(PERIPHS_GPIO_BASEADDR + GPIO_OUT_ADDRESS, mask);
} else {
mask = mask & (~(pwm_obj->single->run_pwm_param[pwm_obj->current_channel - 1].io_clr_mask));
mask = mask | (pwm_obj->single->run_pwm_param[pwm_obj->current_channel - 1].io_set_mask);
REG_WRITE(PERIPHS_GPIO_BASEADDR + GPIO_OUT_ADDRESS, mask);
}
pwm_obj->this_target += pwm_obj->single->run_pwm_param[pwm_obj->current_channel].edg_time;
pwm_obj->current_channel++;
if (pwm_obj->current_channel >= pwm_obj->single->run_channel_num) {
pwm_obj->current_channel = 0;
}
}
}
pwm_obj->this_target -= REG_READ(WDEVTSF0_TIME_LO);
if (pwm_obj->this_target >= MAX_TICKS || pwm_obj->this_target < AHEAD_TICKS1 + AHEAD_TICKS3) {
pwm_obj->this_target = AHEAD_TICKS1 + AHEAD_TICKS3;
}
REG_WRITE(WDEVTSFSW0_LO, 0);
//WARNING, pwm_obj->this_target - AHEAD_TICKS1 should be bigger than 2
REG_WRITE(WDEVTSF0_TIMER_LO, pwm_obj->this_target - AHEAD_TICKS1);
REG_WRITE(WDEVTSF0TIMER_ENA, WDEV_TSF0TIMER_ENA);
}
static void pwm_timer_start(uint32_t period)
{
// suspend all task to void timer interrupt missed
// TODO, do we need lock interrupt here, I think interrupt context will not take 1ms long
// time low field to 0
REG_WRITE(WDEVTSFSW0_LO, 0);
// time high field to 0
REG_WRITE(WDEVTSFSW0_HI, 0);
// time low field to 0 again
REG_WRITE(WDEVTSFSW0_LO, 0);
// target timer low field to 0
REG_WRITE(WDEVTSF0_TIMER_LO, 0);
// target timer high field to 0
REG_WRITE(WDEVTSF0_TIMER_HI, 0);
// target low to the target value, with ahead time AHEAD_TICKS1
pwm_obj->this_target = US_TO_TICKS(period);
// WARNING: pwm_obj->this_target should bigger than AHEAD_TICKS1
REG_WRITE(WDEVTSF0_TIMER_LO, pwm_obj->this_target - AHEAD_TICKS1);
// enable timer
pwm_timer_enable(1);
}
static void pwm_timer_register(void (*handle)(void))
{
wDev_MacTimSetFunc(handle);
}
esp_err_t pwm_start(void)
{
uint8_t i, j;
PWM_CHECK((pwm_obj != NULL), "PWM has not been initialized yet.", ESP_FAIL);
pwm_obj->start_set_mask = 0;
pwm_obj->start_clr_mask = 0;
// Each PWM waveform has two edges in a cycle, rising edge and falling edge.
// Each PWM waveform has a level change at the edge time.
// Therefore, the duty cycle and phase can be adjusted as long as the corresponding edge is generated on the corresponding channel at each edge time.
// What the program needs to do is to establish the relationship between the edge time and the corresponding GPIO level changes.
// Then the edge time is sorted from small to large and the same edge time is merged. The time difference between two adjacent edge times
for (i = 0; i < pwm_obj->channel_num; i++) {
pwm_obj->channel[i].io_mask = (0x1 << pwm_obj->pwm_info[i].io_num);
if (pwm_obj->channel_invert_bitmap & (0x1 << i)) {
if (pwm_obj->pwm_info[i].duty == 0) {
pwm_obj->start_set_mask |= pwm_obj->channel[i].io_mask;
pwm_obj->channel[i].io_mask = 0;
pwm_obj->channel[i].post_edg_time = 0;
pwm_obj->channel[i].neg_edg_time = 0;
} else if (pwm_obj->pwm_info[i].duty == pwm_obj->depth) {
pwm_obj->start_clr_mask |= pwm_obj->channel[i].io_mask;
pwm_obj->channel[i].io_mask = 0;
pwm_obj->channel[i].post_edg_time = 0;
pwm_obj->channel[i].neg_edg_time = 0;
} else {
pwm_obj->channel[i].neg_edg_time = 0;
pwm_obj->channel[i].post_edg_time = US_TO_TICKS(pwm_obj->period) * ((float)pwm_obj->pwm_info[i].duty / pwm_obj->depth);
}
} else {
if (pwm_obj->pwm_info[i].duty == 0) {
pwm_obj->start_clr_mask |= pwm_obj->channel[i].io_mask;
pwm_obj->channel[i].io_mask = 0;
pwm_obj->channel[i].post_edg_time = 0;
pwm_obj->channel[i].neg_edg_time = 0;
} else if (pwm_obj->pwm_info[i].duty == pwm_obj->depth) {
pwm_obj->start_set_mask |= pwm_obj->channel[i].io_mask;
pwm_obj->channel[i].io_mask = 0;
pwm_obj->channel[i].post_edg_time = 0;
pwm_obj->channel[i].neg_edg_time = 0;
} else {
pwm_obj->channel[i].post_edg_time = 0;
pwm_obj->channel[i].neg_edg_time = US_TO_TICKS(pwm_obj->period) * ((float)pwm_obj->pwm_info[i].duty / pwm_obj->depth);
}
}
}
pwm_phase_init();
for (i = 0; i < pwm_obj->channel_num; i++) {
if (pwm_obj->channel[i].post_edg_time < pwm_obj->channel[i].neg_edg_time) {
if (pwm_obj->channel[i].post_edg_time == 0) {
pwm_obj->start_set_mask |= pwm_obj->channel[i].io_mask;
} else {
pwm_obj->start_clr_mask |= pwm_obj->channel[i].io_mask;
}
} else if (pwm_obj->channel[i].post_edg_time > pwm_obj->channel[i].neg_edg_time) {
if (pwm_obj->channel[i].neg_edg_time == 0) {
pwm_obj->start_clr_mask |= pwm_obj->channel[i].io_mask;
} else {
pwm_obj->start_set_mask |= pwm_obj->channel[i].io_mask;
}
}
}
for (i = 0; i < pwm_obj->channel_num * 2; i += 2) {
pwm_obj->param[i].edg_time = pwm_obj->channel[i >> 1].post_edg_time;
pwm_obj->param[i].io_set_mask = pwm_obj->channel[i >> 1].io_mask;
pwm_obj->param[i].io_clr_mask = 0;
pwm_obj->param[i + 1].edg_time = pwm_obj->channel[i >> 1].neg_edg_time;
pwm_obj->param[i + 1].io_set_mask = 0;
pwm_obj->param[i + 1].io_clr_mask = pwm_obj->channel[i >> 1].io_mask;
}
pwm_obj->local_channel = pwm_obj->channel_num * 2 + 1;
pwm_obj->param[pwm_obj->local_channel - 1].edg_time = pwm_obj->depth;
// All edges are sorted from small to large.
pwm_insert_sort();
// Merge the same edges.
for (i = pwm_obj->channel_num * 2; i > 0; i--) {
if (pwm_obj->param[i].edg_time == pwm_obj->param[i - 1].edg_time) {
pwm_obj->param[i - 1].io_set_mask |= pwm_obj->param[i].io_set_mask;
pwm_obj->param[i - 1].io_clr_mask |= pwm_obj->param[i].io_clr_mask;
for (j = i + 1; j <= pwm_obj->channel_num * 2; j++) {
memcpy(&pwm_obj->param[j - 1], &pwm_obj->param[j], sizeof(pwm_param_t));
}
pwm_obj->local_channel--;
}
}
for (i = pwm_obj->local_channel - 1; i > 0; i--) {
pwm_obj->param[i].edg_time = pwm_obj->param[i].edg_time - pwm_obj->param[i - 1].edg_time;
}
if (pwm_obj->param[0].edg_time == 0) {
pwm_obj->start_set_mask |= pwm_obj->param[0].io_set_mask;
pwm_obj->start_clr_mask |= pwm_obj->param[0].io_clr_mask;
for (i = 1; i < pwm_obj->local_channel; i++) {
memcpy(&pwm_obj->param[i - 1], &pwm_obj->param[i], sizeof(pwm_param_t));
}
pwm_obj->local_channel--;
}
pwm_obj->param[pwm_obj->local_channel - 1].io_set_mask = pwm_obj->start_set_mask;
pwm_obj->param[pwm_obj->local_channel - 1].io_clr_mask = pwm_obj->start_clr_mask;
if (pwm_obj->start_flag != 1) {
pwm_obj->start_flag = 1;
pwm_obj->run_pwm_toggle = 0;
pwm_obj->single = &pwm_obj->run_pwm[0];
pwm_obj->current_channel = 0;
memcpy(pwm_obj->run_pwm[0].run_pwm_param, pwm_obj->param, sizeof(pwm_param_t) * pwm_obj->local_channel);
pwm_obj->run_pwm[pwm_obj->run_pwm_toggle].run_channel_num = pwm_obj->local_channel;
pwm_obj->update_done = 1;
pwm_timer_start(pwm_obj->period);
} else {
if (pwm_obj->update_done != 1) {
memcpy(pwm_obj->run_pwm[pwm_obj->run_pwm_toggle].run_pwm_param, pwm_obj->param, sizeof(pwm_param_t) * pwm_obj->local_channel);
pwm_obj->run_pwm[pwm_obj->run_pwm_toggle].run_channel_num = pwm_obj->local_channel;
pwm_obj->update_done = 1;
}
}
return ESP_OK;
}
static esp_err_t pwm_obj_free(void)
{
PWM_CHECK((pwm_obj != NULL), "PWM has not been initialized yet.", ESP_FAIL);
if (pwm_obj->run_pwm[1].run_pwm_param) {
heap_caps_free(pwm_obj->run_pwm[1].run_pwm_param);
}
if (pwm_obj->run_pwm[0].run_pwm_param) {
heap_caps_free(pwm_obj->run_pwm[0].run_pwm_param);
}
if (pwm_obj->pwm_info) {
heap_caps_free(pwm_obj->pwm_info);
}
if (pwm_obj->param) {
heap_caps_free(pwm_obj->param);
}
if (pwm_obj->channel) {
heap_caps_free(pwm_obj->channel);
}
heap_caps_free(pwm_obj);
pwm_obj = NULL;
return ESP_OK;
}
static esp_err_t pwm_obj_malloc(uint8_t channel_num)
{
pwm_obj = (pwm_obj_t *)heap_caps_malloc(sizeof(pwm_obj_t), MALLOC_CAP_8BIT);
if (NULL == pwm_obj) {
return ESP_ERR_NO_MEM;
} else {
memset(pwm_obj, 0, sizeof(pwm_obj_t));
pwm_obj->channel = (pwm_channel_param_t *)heap_caps_malloc(sizeof(pwm_channel_param_t) * channel_num, MALLOC_CAP_8BIT);
pwm_obj->param = (pwm_param_t *)heap_caps_malloc(sizeof(pwm_param_t) * channel_num * 2 + sizeof(pwm_param_t), MALLOC_CAP_8BIT);
pwm_obj->pwm_info = (pwm_info_t *)heap_caps_malloc(sizeof(pwm_info_t) * channel_num, MALLOC_CAP_8BIT);
pwm_obj->run_pwm[0].run_pwm_param = (pwm_param_t *)heap_caps_malloc(sizeof(pwm_param_t) * channel_num * 2 + sizeof(pwm_param_t), MALLOC_CAP_8BIT);
pwm_obj->run_pwm[1].run_pwm_param = (pwm_param_t *)heap_caps_malloc(sizeof(pwm_param_t) * channel_num * 2 + sizeof(pwm_param_t), MALLOC_CAP_8BIT);
}
if (pwm_obj->channel && pwm_obj->param && pwm_obj->pwm_info && pwm_obj->run_pwm[0].run_pwm_param && pwm_obj->run_pwm[1].run_pwm_param) {
return ESP_OK;
} else {
pwm_obj_free();
return ESP_ERR_NO_MEM;
}
return ESP_OK;
}
esp_err_t pwm_init(uint32_t period, uint32_t *duties, uint8_t channel_num, const uint32_t *pin_num)
{
PWM_CHECK(pwm_obj == NULL, "pwm has been initialized", ESP_FAIL);
PWM_CHECK(channel_num <= MAX_PWM_CHANNEL, "Channel num out of range", ESP_ERR_INVALID_ARG);
PWM_CHECK(NULL != duties, "duties pointer is empty", ESP_ERR_INVALID_ARG);
PWM_CHECK(NULL != pin_num, "Pointer is empty", ESP_ERR_INVALID_ARG);
PWM_CHECK(period >= 10, "period setting is too short", ESP_ERR_INVALID_ARG);
uint8_t i;
if (ESP_ERR_NO_MEM == pwm_obj_malloc(channel_num)) {
pwm_obj_free();
return ESP_ERR_NO_MEM;
}
pwm_obj->depth = period;
pwm_obj->channel_num = channel_num;
for (i = 0; i < channel_num; i++) {
pwm_obj->pwm_info[i].io_num = pin_num[i];
pwm_obj->gpio_bit_mask |= (0x1 << pin_num[i]);
}
gpio_config_t io_conf;
io_conf.intr_type = GPIO_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = pwm_obj->gpio_bit_mask;
io_conf.pull_down_en = 0;
io_conf.pull_up_en = 0;
gpio_config(&io_conf);
GPIO_REG_WRITE(GPIO_ENABLE_W1TS_ADDRESS, pwm_obj->gpio_bit_mask);
pwm_set_period_duties(period, duties);
pwm_timer_register(pwm_timer_intr_handler);
ESP_LOGI(TAG, "--- %s\n", PWM_VERSION);
pwm_obj->init_flag = 1;
return ESP_OK;
}
esp_err_t pwm_stop(uint32_t stop_level_mask)
{
int16_t i = 0;
pwm_timer_enable(0);
uint32_t level_set = REG_READ(PERIPHS_GPIO_BASEADDR + GPIO_OUT_ADDRESS);
for (i = 0; i < pwm_obj->channel_num; i++) {
if (stop_level_mask & (0x1 << i)) {
level_set |= 0x1 << pwm_obj->pwm_info[i].io_num;
} else {
level_set &= (~(0x1 << pwm_obj->pwm_info[i].io_num));
}
}
REG_WRITE(PERIPHS_GPIO_BASEADDR + GPIO_OUT_ADDRESS, level_set);
pwm_obj->start_flag = 0;
return ESP_OK;
}
esp_err_t pwm_deinit(void)
{
PWM_CHECK((pwm_obj != NULL), "PWM has not been initialized yet.", ESP_FAIL);
PWM_CHECK((pwm_obj->init_flag), "PWM has been deleted.", ESP_FAIL);
pwm_obj->init_flag = 0;
pwm_stop(0xFF); // stop all channel
pwm_timer_register(NULL);
pwm_obj_free();
return ESP_OK;
}
Reference in New Issue View Git Blame Copy Permalink