menu "Partition Table"

choice PARTITION_TABLE_TYPE
    prompt "Partition Table"
    default PARTITION_TABLE_SINGLE_APP
    help
        The partition table to flash to the ESP32. The partition table
        determines where apps, data and other resources are expected to
        be found.

        The predefined partition table CSV descriptions can be found
        in the components/partition_table directory. Otherwise it's
        possible to create a new custom partition CSV for your application.

config PARTITION_TABLE_SINGLE_APP
    bool "Single factory app, no OTA"
config PARTITION_TABLE_TWO_OTA
    bool "Factory app, two OTA definitions"
config PARTITION_TABLE_CUSTOM
    bool "Custom partition table CSV"
endchoice

config PARTITION_TABLE_CUSTOM_FILENAME
    string "Custom partition CSV file" if PARTITION_TABLE_CUSTOM
    default partitions.csv
    help
        Name of the custom partition CSV filename. This path is evaluated
        relative to the project root directory.

config PARTITION_TABLE_OFFSET
    hex "Partition table offset address at flash"
    default 0x8000
    help
        The partition table cannot be placed at application address.

config PARTITION_TABLE_CUSTOM_PHY_DATA_OFFSET
    hex "PHY data partition offset" if PARTITION_TABLE_CUSTOM
    depends on ESP_PHY_INIT_DATA_IN_PARTITION
    default 0xf000
    help
        If using a custom partition table, specify the offset in the flash
        where 'make flash' should write the initial PHY data file.


config PARTITION_TABLE_FILENAME
       string
       default partitions_singleapp.csv if PARTITION_TABLE_SINGLE_APP && !ESP32_ENABLE_COREDUMP_TO_FLASH
       default partitions_singleapp_coredump.csv if PARTITION_TABLE_SINGLE_APP && ESP32_ENABLE_COREDUMP_TO_FLASH
       default partitions_two_ota.csv if PARTITION_TABLE_TWO_OTA && !ESP32_ENABLE_COREDUMP_TO_FLASH && !ESPTOOLPY_FLASHSIZE_1MB
       default partitions_two_ota.1MB.csv if PARTITION_TABLE_TWO_OTA && !ESP32_ENABLE_COREDUMP_TO_FLASH && ESPTOOLPY_FLASHSIZE_1MB
       default partitions_two_ota_coredump.csv if PARTITION_TABLE_TWO_OTA && ESP32_ENABLE_COREDUMP_TO_FLASH
       default PARTITION_TABLE_CUSTOM_FILENAME if PARTITION_TABLE_CUSTOM

config PHY_DATA_OFFSET
       depends on ESP_PHY_INIT_DATA_IN_PARTITION
       hex
       default PARTITION_TABLE_CUSTOM_PHY_DATA_OFFSET if PARTITION_TABLE_CUSTOM
       default 0xf000 # this is the factory app offset used by the default tables

config APP2_SUPPORT
    depends on ESPTOOLPY_FLASHSIZE_1MB && (PARTITION_TABLE_TWO_OTA || PARTITION_TABLE_CUSTOM)
    bool "Support to setup partition parameter of APP2" if PARTITION_TABLE_CUSTOM
    default y
    help
        Enable this option, if you want to have APP1 & APP2 in 1MB SPI Flash.

config APP1_OFFSET
    hex "APP1 partition offset" if PARTITION_TABLE_CUSTOM
    default 0x10000
    help
        If using a custom partition table, specify the offset in the flash
        where the APP1 located.

        It should be same as the value in the custom partition table CSV.

config APP1_SIZE
    hex "APP1 partition size(by bytes)" if PARTITION_TABLE_CUSTOM
    default 0x70000 if APP2_SUPPORT
    default 0xF0000
    help
        APP1 partition size by bytes.

        It should be same as the value in the custom partition table CSV.

config APP2_OFFSET
    depends on APP2_SUPPORT
    hex "APP2 partition offset" if PARTITION_TABLE_CUSTOM
    default 0x80000
    help
        If using a custom partition table, specify the offset in the flash
        where the APP2 located.

        It should be same as the value in the custom partition table CSV.

config APP2_SIZE
    depends on APP2_SUPPORT
    hex "APP2 partition size(by bytes)" if PARTITION_TABLE_CUSTOM
    default 0x70000
    help
        APP2 partition size by bytes.

        It should be same as the value in the custom partition table CSV.

endmenu