/*
* ESPRSSIF MIT License
*
* Copyright (c) 2015 <ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD>
*
* Permission is hereby granted for use on ESPRESSIF SYSTEMS ESP8266 only, in which case,
* it is free of charge, to any person obtaining a copy of this software and associated
* documentation files (the "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the Software is furnished
* to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef __GPIO_H__
#define __GPIO_H__
#ifdef __cplusplus
extern "C" {
#endif
#include "esp8266/gpio_register.h"
#define GPIO_Pin_0 (BIT(0)) /* Pin 0 selected */
#define GPIO_Pin_1 (BIT(1)) /* Pin 1 selected */
#define GPIO_Pin_2 (BIT(2)) /* Pin 2 selected */
#define GPIO_Pin_3 (BIT(3)) /* Pin 3 selected */
#define GPIO_Pin_4 (BIT(4)) /* Pin 4 selected */
#define GPIO_Pin_5 (BIT(5)) /* Pin 5 selected */
#define GPIO_Pin_6 (BIT(6)) /* Pin 6 selected */
#define GPIO_Pin_7 (BIT(7)) /* Pin 7 selected */
#define GPIO_Pin_8 (BIT(8)) /* Pin 8 selected */
#define GPIO_Pin_9 (BIT(9)) /* Pin 9 selected */
#define GPIO_Pin_10 (BIT(10)) /* Pin 10 selected */
#define GPIO_Pin_11 (BIT(11)) /* Pin 11 selected */
#define GPIO_Pin_12 (BIT(12)) /* Pin 12 selected */
#define GPIO_Pin_13 (BIT(13)) /* Pin 13 selected */
#define GPIO_Pin_14 (BIT(14)) /* Pin 14 selected */
#define GPIO_Pin_15 (BIT(15)) /* Pin 15 selected */
#define GPIO_Pin_All (0xFFFF) /* All pins selected */
#define GPIO_PIN_REG_0 PERIPHS_IO_MUX_GPIO0_U
#define GPIO_PIN_REG_1 PERIPHS_IO_MUX_U0TXD_U
#define GPIO_PIN_REG_2 PERIPHS_IO_MUX_GPIO2_U
#define GPIO_PIN_REG_3 PERIPHS_IO_MUX_U0RXD_U
#define GPIO_PIN_REG_4 PERIPHS_IO_MUX_GPIO4_U
#define GPIO_PIN_REG_5 PERIPHS_IO_MUX_GPIO5_U
#define GPIO_PIN_REG_6 PERIPHS_IO_MUX_SD_CLK_U
#define GPIO_PIN_REG_7 PERIPHS_IO_MUX_SD_DATA0_U
#define GPIO_PIN_REG_8 PERIPHS_IO_MUX_SD_DATA1_U
#define GPIO_PIN_REG_9 PERIPHS_IO_MUX_SD_DATA2_U
#define GPIO_PIN_REG_10 PERIPHS_IO_MUX_SD_DATA3_U
#define GPIO_PIN_REG_11 PERIPHS_IO_MUX_SD_CMD_U
#define GPIO_PIN_REG_12 PERIPHS_IO_MUX_MTDI_U
#define GPIO_PIN_REG_13 PERIPHS_IO_MUX_MTCK_U
#define GPIO_PIN_REG_14 PERIPHS_IO_MUX_MTMS_U
#define GPIO_PIN_REG_15 PERIPHS_IO_MUX_MTDO_U
#define GPIO_PIN_REG(i) \
(i==0) ? GPIO_PIN_REG_0: \
(i==1) ? GPIO_PIN_REG_1: \
(i==2) ? GPIO_PIN_REG_2: \
(i==3) ? GPIO_PIN_REG_3: \
(i==4) ? GPIO_PIN_REG_4: \
(i==5) ? GPIO_PIN_REG_5: \
(i==6) ? GPIO_PIN_REG_6: \
(i==7) ? GPIO_PIN_REG_7: \
(i==8) ? GPIO_PIN_REG_8: \
(i==9) ? GPIO_PIN_REG_9: \
(i==10)? GPIO_PIN_REG_10: \
(i==11)? GPIO_PIN_REG_11: \
(i==12)? GPIO_PIN_REG_12: \
(i==13)? GPIO_PIN_REG_13: \
(i==14)? GPIO_PIN_REG_14: \
GPIO_PIN_REG_15
#define GPIO_PIN_ADDR(i) (GPIO_PIN0_ADDRESS + i*4)
#define GPIO_ID_IS_PIN_REGISTER(reg_id) \
((reg_id >= GPIO_ID_PIN0) && (reg_id <= GPIO_ID_PIN(GPIO_PIN_COUNT-1)))
#define GPIO_REGID_TO_PINIDX(reg_id) ((reg_id) - GPIO_ID_PIN0)
typedef enum {
GPIO_PIN_INTR_DISABLE = 0, /**< disable GPIO interrupt */
GPIO_PIN_INTR_POSEDGE = 1, /**< GPIO interrupt type : rising edge */
GPIO_PIN_INTR_NEGEDGE = 2, /**< GPIO interrupt type : falling edge */
GPIO_PIN_INTR_ANYEDGE = 3, /**< GPIO interrupt type : bothe rising and falling edge */
GPIO_PIN_INTR_LOLEVEL = 4, /**< GPIO interrupt type : low level */
GPIO_PIN_INTR_HILEVEL = 5 /**< GPIO interrupt type : high level */
} GPIO_INT_TYPE;
typedef enum {
GPIO_Mode_Input = 0x0, /**< GPIO mode : Input */
GPIO_Mode_Out_OD, /**< GPIO mode : Output_OD */
GPIO_Mode_Output , /**< GPIO mode : Output */
GPIO_Mode_Sigma_Delta , /**< GPIO mode : Sigma_Delta */
} GPIOMode_TypeDef;
typedef enum {
GPIO_PullUp_DIS = 0x0, /**< disable GPIO pullup */
GPIO_PullUp_EN = 0x1, /**< enable GPIO pullup */
} GPIO_Pullup_IF;
typedef struct {
uint16 GPIO_Pin; /**< GPIO pin */
GPIOMode_TypeDef GPIO_Mode; /**< GPIO mode */
GPIO_Pullup_IF GPIO_Pullup; /**< GPIO pullup */
GPIO_INT_TYPE GPIO_IntrType; /**< GPIO interrupt type */
} GPIO_ConfigTypeDef;
/** \defgroup Driver_APIs Driver APIs
* @brief Driver APIs
*/
/** @addtogroup Driver_APIs
* @{
*/
/** \defgroup GPIO_Driver_APIs GPIO Driver APIs
* @brief GPIO APIs
*/
/** @addtogroup GPIO_Driver_APIs
* @{
*/
/**
* @brief Set GPIO pin output level.
*
* @param gpio_no : The GPIO sequence number.
* @param bit_value : GPIO pin output level.
*
* @return null
*/
#define GPIO_OUTPUT_SET(gpio_no, bit_value) \
gpio_output_conf(bit_value<<gpio_no, ((~bit_value)&0x01)<<gpio_no, 1<<gpio_no, 0)
/**
* @brief Set GPIO pin output level.
*
* @param gpio_bits : The GPIO bit number.
* @param bit_value : GPIO pin output level.
*
* @return null
*/
#define GPIO_OUTPUT(gpio_bits, bit_value) \
if(bit_value) gpio_output_conf(gpio_bits, 0, gpio_bits, 0);\
else gpio_output_conf(0, gpio_bits, gpio_bits, 0)
/**
* @brief Disable GPIO pin output.
*
* @param gpio_no : The GPIO sequence number.
*
* @return null
*/
#define GPIO_DIS_OUTPUT(gpio_no) gpio_output_conf(0, 0, 0, 1<<gpio_no)
/**
* @brief Enable GPIO pin intput.
*
* @param gpio_bits : The GPIO bit number.
*
* @return null
*/
#define GPIO_AS_INPUT(gpio_bits) gpio_output_conf(0, 0, 0, gpio_bits)
/**
* @brief Enable GPIO pin output.
*
* @param gpio_bits : The GPIO bit number.
*
* @return null
*/
#define GPIO_AS_OUTPUT(gpio_bits) gpio_output_conf(0, 0, gpio_bits, 0)
/**
* @brief Sample the level of GPIO input.
*
* @param gpio_no : The GPIO sequence number.
*
* @return the level of GPIO input
*/
#define GPIO_INPUT_GET(gpio_no) ((gpio_input_get()>>gpio_no)&BIT(0))
/**
* @brief Enable GPIO16 output.
*
* @param null
*
* @return null
*/
void gpio16_output_conf(void);
/**
* @brief Set GPIO16 output level.
*
* @param uint8 value : GPIO16 output level.
*
* @return null
*/
void gpio16_output_set(uint8 value);
/**
* @brief Enable GPIO pin intput.
*
* @param null
*
* @return null
*/
void gpio16_input_conf(void);
/**
* @brief Sample the value of GPIO16 input.
*
* @param null
*
* @return the level of GPIO16 input.
*/
uint8 gpio16_input_get(void);
/**
* @brief Configure Gpio pins out or input.
*
* @param uint32 set_mask : Set the output for the high bit, the
* corresponding bit is 1, the output of high,
* the corresponding bit is 0, do not change the state.
* @param uint32 set_mask : Set the output for the high bit, the
* corresponding bit is 1, the output of low,
* the corresponding bit is 0, do not change the state.
* @param uint32 enable_mask : Enable Output
* @param uint32 disable_mask : Enable Input
*
* @return null
*/
void gpio_output_conf(uint32 set_mask, uint32 clear_mask, uint32 enable_mask, uint32 disable_mask);
/**
* @brief Register an application-specific interrupt handler for GPIO pin interrupts.
*
* @param void *fn:interrupt handler for GPIO pin interrupts.
* @param void *arg:interrupt handler's arg
*
* @return null
*/
void gpio_intr_handler_register(void *fn, void *arg);
/**
* @brief Configure GPIO wake up to light sleep,Only level way is effective.
*
* @param uint32 i : Gpio sequence number
* @param GPIO_INT_TYPE intr_state : the level of wake up to light sleep
*
* @return null
*/
void gpio_pin_wakeup_enable(uint32 i, GPIO_INT_TYPE intr_state);
/**
* @brief Disable GPIO wake up to light sleep.
*
* @param null
*
* @return null
*/
void gpio_pin_wakeup_disable();
/**
* @brief Config interrupt types of GPIO pin.
*
* @param uint32 i : The GPIO sequence number.
* @param GPIO_INT_TYPE intr_state : GPIO interrupt types.
*
* @return null
*/
void gpio_pin_intr_state_set(uint32 i, GPIO_INT_TYPE intr_state);
/**
* @brief Sample the value of GPIO input pins and returns a bitmask.
*
* @param null
*
* @return bitmask of GPIO pins input
*/
uint32 gpio_input_get(void);
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif